Vixen Lens Heater 360 IV

The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)

With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft

The 360 IV Lens Heater is designed to prevent camera lenses and telescopes from fogging up due to dew. It is also well suited for eyepieces.The heating element is a carbon fiber heater with a high thermal efficiency. The textile heating element provides great flexibility compared to other heating materials. The power cord (USB cable) has a particularly high flexibility to be still elastic at low temperatures. A very flexible Velcro tape allows for quick and easy attachment to and removal from the lens. The tape can be easily removed from the lens without pulling tightly. The heating tape has a very low power consumption and can be operated with a 10,000 mA battery for up to 14 hours.The Vixen Lens Heater 360 IV in detailWhen moisture in the air comes into contact with an object whose temperature is lower than the ambient temperature, small drops of water form - so-called dew condensation. Astrophotography often suffers from such lens fogging and the photo turns milky. Because the temperature and humidity change during the night and the camera becomes cooler than the ambient temperature, it is important to warm the objective's or telescope's lens by using heaters to prevent it from fogging. We recommend using the Lens Heater 360 IV when you want to do astrophotography or night photography on the coast, in the mountains or in cold regions. The heating elements are made of carbon fibers with improved heating performance, introduced for the fourth generation Vixen Lens Heater 360 IV. They efficiently keep the lens warm and fog-free with minimal power consumption. The heater temperature reaches 10 degrees Celsius above the ambient temperature (at 20 °C outside temperature and no wind). However, it varies according to influences in the environment. For power supply the lens heater is equipped with a detachable coiled cable (USB Type-C), up to 50 cm long. The 360 IV lens heater consumes only 2.5 W of power (5 V - 0.5 A). With a portable USB battery of e.g. 10,000 mA, it can operate continuously for about 14 hours (at 20 °C outdoor temperature). However, the operating time varies greatly depending on the environment and temperature. The soft and non-slip surface of the heating tape allows for easy attachment to the objective, eyepiece or telescope. The heater consists of a 30 mm wide and 600 mm long heating tape and is suitable for diameters up to 100 mm.FEATURESHeating type: carbon fiber textile heatingTemperature: 10 degrees Celsius above ambient outdoor temperature (at 20° C, no wind)Power source, power consumption: USB, 5 V, 0.5 A, 2.5 WPower cable: USB A (male)Connector: USB type C connector detachable coiled cable 20 to 50 cmOperating time: approximately 14 hours with fully charged 10,000 mAh battery (at 20 °C outdoor temperature)Recommended for lenses with a width of 30 mm and an outer diameter of 45 to 100 mmDimensions: 30 x 600 mmTotal weight: 67 gSCOPE OF DELIVERYLens Heater 360 IVUSB spiral cable

Each dew shield threads into the front lens cell and effectively inhibits the formation of dew on the lens surface in humid/cool observation conditions. Reduces reflections caused by scattered light incident from the side. Protects the front lens from accidental contact and scratches. FEATURES Prevents fogging of the front lens Reduces reflections caused by stray light Protects the front lens of the telescope Use in humid/cool conditions Suitable for BRESSER MCX127/MC127 telescopes Easy to screw into the telescopic tube Length: 120mm , weight: 160g SCOPE OF DELIVERY Dew cap, 1 piece

Vixen Tube Clamp 115s for VSD90ss This high-quality tube clamp made in Japan is used to mount the VSD90ss f 5.5 astrograph. The base plate has M6 and M8 holes and can therefore be used on almost all mounts.FEATURES Supplied with various holes as standard High-quality CNC-milled aluminium tube clamp with non-slip locking screw Felt on the inside, prevents scratches on the VSD tube Threaded screw holes bottom: M8 holes x 2 (spacing 35 mm), M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch holes x 3 (inside 30 mm), 1/4-inch holes x 3 (interval 30 mm) Threaded screw holes top: M8 holes x 2 (spacing 35 mm) x 2 sets, M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch hole x 1 in the centre, M4 holes x 2 (spacing 20 mm) Dimensions: 162 × 71 × 155 mmSCOPE OF DELIVERY VSD tube clamp

Additional counterweight to balance heavy accessories etc.

Universal mounting rail for mounting a photo camera on an EQ mount with Vixen GP mount for astrophotography. The EXPLORE SCIENTIFIC camera dovetail rail is made of die-cast aluminium. The dovetail-shaped mounting rail is 45 mm wide (similar to the Vixen dovetail style) and 280 mm long. The matt black anodized surface has a laser engraved scale on one side with a fine graduation with 2 mm increments. This makes it easier to determine the center of gravity when placing the camera on the mounting head. To protect the clamping surface there is a stainless steel clamping plate on the opposite side. The dovetail plate is equipped with rubber inserts at 3 positions. This allows a secure mounting of the camera equipment and prevents unintentional slipping and twisting. The mounting rail has a screw fastening with 1/4 inch photo thread, which is suitable for almost all commercially available camera systems. The screw attachment can be used in 3 different elongated hole positions to adjust a perfect balance. In addition, an adapter from 1/4 inch to 3/8 inch photo thread is also included, so that ball heads with the larger thread version can also be used directly. The camera mounting rail weighs only 250 grams. Suitable for all EXPLORE SCIENTIFIC and BRESSER mounts and also mounts of other brands that accept the popular Vixen-GP dovetail rail. FEATURES Universal camera mounting rail Dovetail with 45 mm width Length 280mm; weight 250 grams Suitable for EQ mounts with Vixen GP dovetail Camera mounting screw with 1/4 inch photo thread Thread adapter 1/4 inch to 3/8 inch Laser engraved scale with 2 mm fine graduation Stainless steel clamping plate Rubber inserts against slipping and twisting 3 elongated holes for mounting the camera SCOPE OF DELIVERY Camera mounting rail Mounting screw 1/4 inch Thread adapter 3/8 inch

The laser-collimator makes aligning the mirrors of a Newtonian telescope simple, fast and precise. With the laser you collimate your optics even in the dark without additional accessories. Precisely machined it fits a 1,25" focuser without tilting. The built-in projection area enables collimating even long focal length scopes in a breeze. Suitable for Newtonian, Schmidt-Newtonian and Maksutov-Newtonian teleskopes. FEATURES31.7mm(1.25") Eyepiece Barrel Diameter Machined anodized aluminum housing with all internal surfaces coated non-reflective flat blackBuilt in laser collimatableIMPORTANT: Laser products have to be kept out of reach of children!

The Vixen dew cap heater prevents your optics from fogging up due to dew.A must-have accessory for cold and damp nights.FEATURES Consumption: 16.2 Ohm (12 V, 8.9 W) Dimensions: 655 mm long heater with 2.2 m cable Connection: 2.1 socket with medium-negative polarity Weight: 120 g DELIVERY CONTENT Battery box Vixen dew cap heater

Vixen SX 125 mm tube ring pair, whiteAttaches telescope (e.g. the Vixen SD and ED 115) to the mountDovetail bar is recommended as optional accessoryFEATURESEnables stable installation of telescope on the mountFelt-lined interiorFor the Vixen SD 115/ED 115Weight: 500 gDELIVERY CONTENT2x Tube clampsScrews

7 kg counterweight for balancing the mount with heavy telescopesSuitable for AXD, AXD2 and AXJ mountsFEATURES Counterweight for AXD/AXJ mounts Weight: 7 kgDELIVERY CONTENT7 kg counterweightClamp screw