Product information "LUNT LS40FHa H-alpha double-stack filter for LS40THa"
Double-stack filter for LS40THa telescopes.
The bandwidth of H-alpha systems can be reduced by so-called "double-stacking". A smaller bandwidth provides much more contrast at the solar surface, thereby many more details will become visible.
Double-stacking with a bandwidth of only <0.55 Angstrom is also possible at the LS40THa telescopes. Therefore Lunt Solar Systems has especially designed this LS40FHa double-stack filter in compact housing.
Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B500 blocking-filter, and Helical focuser.The LS40THa/B500 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B500, this is good for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.FEATURESAperture: 40mm (no central obstruction, 2-lens refractor)Focal length: 400mmBandwidth: <0.7 AngstromTuning: mechanical tilt-tuningBlocking filter: B500 with 1.25 inch connectionFocuser: Helical focuserDovetail bar at standard GP-level1/4-20 tapped base (standard thread for photo-tripods)Sol-Searcher includedWeight: 1.2kgLength: 41cmSCOPE OF DELIVERYLS40THa Solar TelescopeB500 blocking filter in star-diagonal housing1.25 inch Helical focuserDovetail bar (GP level)Sol-SearcherInstruction manual
Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B600 blocking-filter, and Helical focuser.The LS40THa/B600 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B600, this is very good for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.FEATURESAperture: 40mm (no central obstruction, 2-lens refractor)Focal length: 400mmBandwidth: <0.7 AngstromTuning: mechanical tilt-tuningBlocking filter: B600 with 1.25 inch connectionFocuser: Helical focuserDovetail bar at standard GP-level1/4-20 tapped base (standard thread for photo-tripods)Sol-Searcher includedWeight: 1.2kgLength: 41cmSCOPE OF DELIVERYLS40THa Solar TelescopeB600 blocking filter in star-diagonal housing1.25 inch Helical focuserDovetail bar (GP level)Sol-SearcherInstruction manual
Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B1200 blocking-filter, and Helical focuser.The LS40THa/B1200 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B1200, this is excellent for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.FEATURESAperture: 40mm (no central obstruction, 2-lens refractor)Focal length: 400mmBandwidth: <0.7 AngstromTuning: mechanical tilt-tuningBlocking filter: B1200 with 1.25 inch connectionFocuser: Helical focuserDovetail bar at standard GP-level1/4-20 tapped base (standard thread for photo-tripods)Sol-Searcher includedWeight: 1.2kgLength: 41cmSCOPE OF DELIVERYLS40THa Solar TelescopeB1200 blocking filter in star-diagonal housing1.25 inch Helical focuserDovetail bar (GP level)Sol-SearcherInstruction manual
Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sunvery resistant to damage100% safeSCOPE OF DELIVERYSolar eclipse glasses (5 pieces)
Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.
FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sun very resistant to damage
100% safe SCOPE OF DELIVERYSolar eclipse glasses (1 piece)
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 203mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 203mmFits to outer telescope tube diameter from 200 to 280mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 90mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 90mmFits to outer telescope tube diameter from 90 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 114mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 114mmFits to outer telescope tube diameter from 110 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter
Explore Scientific Solarix Solar Filter Film.Watch Solar Eclipses, Sun Spots, Planet Transits, crossing aircrafts and satellites.Suitable for making your individual solar filter for
telescopes, binoculars, photo- and video cameras.New developed solar filter film that has the optical
quality of the glass with the advantages of impregnated polymer.Collateral protection by using impregnated polymer
and additional filter coated surface.Creates a very natural and yellow solar image.Also qualified for high magnifications.Consistent brightness and even density with any aperture.Ideal for visual observing and photographic use.Light weight and does not require re-balancing tube
assembly.Flat
surface compared to other thin film filters that have wrinkles and
creases.Resistant against any damage.Construction manual included for making your individual solar filter and eclipse glasses.100% safeSpecifications:Material thickness: 0.05mm Optical density: 5Optical transmission: 1/1000 of 1% (99.999% incoming light blocked)Dimension: A4 - 210 x 297mmSCOPE OF DELIVERYSolar Filter Film, A4 sizeHard carton stencil for cutting out a telescope filter holder and eclipse glassesContruction- and Instruction manual Additional materials which need to be purchased separately:Double sided gluing tape.Universal adhessive glue.Paper scissor.
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 127mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 127mmFits to outer telescope tube diameter from 150 to 280mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter
Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B500 blocking-filter, and Helical focuser.The LS40THa/B500 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B500, this is good for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.FEATURESAperture: 40mm (no central obstruction, 2-lens refractor)Focal length: 400mmBandwidth: <0.7 AngstromTuning: mechanical tilt-tuningBlocking filter: B500 with 1.25 inch connectionFocuser: Helical focuserDovetail bar at standard GP-level1/4-20 tapped base (standard thread for photo-tripods)Sol-Searcher includedWeight: 1.2kgLength: 41cmSCOPE OF DELIVERYLS40THa Solar TelescopeB500 blocking filter in star-diagonal housing1.25 inch Helical focuserDovetail bar (GP level)Sol-SearcherInstruction manual
The BRESSER Field Tripod ST-3 is a solid and height-adjustable tripod with double tripod leg clamp and made of corrosion-resistant stainless steel. It is suitable for direct usage with the BRESSER Slider Binocular Mount. Adjust the extendable stainless steel tripod to the desired base height and thereby pre-select your favourite observation position. For example, for landscape observation while standing or sitting, the full tripod height should be used. For night sky observation, a lower setting is recommended to ensure a comfortable viewing position while sitting or lying down. The tripod is equipped with a standard GP mounting head and a central screw with metric M10 threaded shaft. It is also suitable for EXOS-1 and EXOS-2 EQ mounts. The upper tripod leg tubes have a diameter of 50.8 mm (2 inches).FEATURESFor usage with BRESSER Slider Binocular Mount Standard GP mount head Also suitable for EXOS-1 and EXOS-2 EQ mounts Solid stainless steel and aluminium structure Double tripod leg clamp Height adjustable approximately from 68 to 110 cm Tripod weight: 5.5 kg Transport length approximately 87 cmUpper tripod leg tubes have a diameter of 50.8 mm (2 inches)SCOPE OF DELIVERYTripod Accessory tray Central spindle
Explore hidden worlds through your own eyes – with the BRESSER Pollux-I telescope starter set for budding amateur astronomers, you can go on your own journey of discovery in outer space. Everything you need is already included: the astronomical reflector telescope with 150 mm aperture and 750 mm focal length, the equatorial mount, the tripod and a wide range of accessories for astronomical observations. Perfect for getting started quickly: the system is very easy to use. In addition, the entry-level telescope impresses with its versatility: you can observe the Moon and planets as well as star clusters, gas nebulae and even galaxies through the high-quality optics. Due to the parabolic primary mirror the image delights with impressive sharpness and high contrast. In addition, the 2-inch focuser allows for the use of high-quality eyepieces. Perfect conditions for fascinating sights of the night sky!
Time-proven optics for your first astro-steps – the telescope
By choosing the Pollux-I, you’ll start your journey to the stars with a classic Newtonian reflector telescope. Beginners are often surprised by the fact that with telescopes of this type you don't look in at the back of the tube, but at the front and laterally. This gives you the advantage of always being able to look into the telescope in a comfortable posture, even when it's pointed vertically upwards at the sky. In addition, these reflector telescopes offer optics that are absolutely free of chromatic aberrations and thus provide good imaging properties.
The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 750 mm focal length result in a short focal ratio (ratio of aperture to focal length) of 1 to 5 (F/5). On the one hand, this makes the telescope fast and provide a bright image. On the other hand, high magnifications can be achieved. This combination makes the entry-level telescope so versatile. In addition, the Pollux-I is equipped with a parabolic primary mirror. The remarkable effect of this special mirror shape: you enjoy excellent imaging properties at all magnification levels.
So you can look forward to the complete range of celestial highlights. At low to medium magnification, you can admire deep-sky objects such as open star clusters, globular clusters, gas nebulae and even galaxies such as the pair of galaxies M65 and M66 in the constellation Leo. And at high magnifications, observing the planets or details on the Moon is an absolute pleasure.
You can get really close to your favourite objects: The aperture of 150 mm achieves a resolving power that allows magnifications of up to about 300x with sharp images. Technically, even higher magnifications are possible, theoretically up to 562.5x using the included accessories. However, with increasing magnification, the sharpness of the image can slowly decrease. In addition, the prevailing conditions always make a difference: How highly you can magnify always depends not only on the power of the telescope but also on the air turbulence in the atmosphere (seeing conditions).
The telescope also impresses with its flexibility in terms of eyepiece compatibility: it comes with a 2-inch focuser (focuser extension) and an adapter from 2 inch to 1.25 inch. This enables you to use eyepieces with 1.25-inch sockets (about 31.7 mm) as well as eyepieces with the larger 2-inch sockets (about 50.8 mm) with large fields of view.
Note for nature lovers:
If you choose a Newtonian telescope like the Pollux-I reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes.
Perfect foundation for fascinating discoveries – mount and tripod
Your beginner's telescope is securely held by the height-adjustable aluminium tripod with equatorial mount. The special feature of this mount, also known as a parallactic mount: in contrast to azimuthal models, the movement of the celestial bodies is only compensated for on one axis instead of two. For this purpose, you simply align one axis parallel to the Earth's axis by pointing it approximately at Polaris.
For precise and comfortable alignment and tracking of the entry-level telescope, the Pollux-I comes equipped with two flexible shafts with fine adjustment. And to ensure that the interchangeable eyepieces, barlow lens etc. always remain within reach, they can be stored on the tray between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable!
Well equipped for the ideal start – the accessories
Your entry-level telescope comes with a wide range of astronomy accessories so that you can start to be amazed right away. For example, the LED viewfinder helps you align the telescope and find celestial objects. Installed in parallel on the telescope, this direction finder shows you a red dot when you look through it. It appears to hover in front of the sky and thereby shows you where the telescope is pointing.
Varying view of the sky: With the two eyepieces with 1.25-inch sockets (31.7 mm), you can admire your astronomical discoveries at different magnifications. The 3x barlow lens already included in the set triples the magnification of the eyepiece you are using.
Enjoy safe observations of our Sun with the included solar filter. This way you can easily take a closer look at sunspots and granulation on our own star.
CAUTION: Never point the telescope at the Sun without the solar filter!
Astrophotography for beginners: with the smartphone adapter, you can use your mobile phone as a camera on the telescope. This way you will quickly impress friends and relatives with your own first snapshots e. g. of the Moon or the Sun.
FEATURES
Reflector telescope with 150 mm aperture and 750 mm focal length
Reflector type Newton with parabolic primary mirror
Very well suited for observing the Sun, Moon and planets as well as star clusters, gas nebulae and galaxies
Height-adjustable tripod with equatorial EQ3 mount
Precise movement through flexible shafts and fine adjustment in both axes
Easy to use, very good for beginners
Focal ratio F/5, thus very suitable for many celestial objects
2-inch (50.8 mm) focuser with adapter to 1.25-inch (31.7 mm)
Two eyepieces and one barlow lens with 1.25-inch (31.7 mm) sockets for different magnifications
Safe solar observation with the included solar filter
First steps in astrophotography with smartphone camera adapter
SCOPE OF DELIVERY
Telescope
Aluminium tripod
Equatorial EQ3 mount
Adapter from 2 inch to 1.25 inch
Eyepieces: 4 mm and 20 mm (1.25-inch sockets)
Barlow lens 3x (1.25-inch socket)
LED illuminated dot finder
Solar filter
Smartphone camera adapter
Accessory tray
Astronomy software as download
Instruction manual
60mm H-alpha double-stack solar filter, for all LS60FHa filter-systems and LS60THa/LS60MT telescopes.This double-stack Etalon is compatible to all Lunt Solar Systems LS60FHa filter-systems and LS60THa / LS60MT telescopes. Adding this additional double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom (dependent upon used telescope). So you will have much more contrast and more details on the sun will be visible.Without blocking filter! Only for use as double-stack filter, or together with a additional available blocking filter. If the filter is used only single stacked together with a optional blocking filter, then the bandwidth is <0.75 Angstrom.FEATURESAperture: 60 mmNo central obstructionBandwidth double stacked: <0,55 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 85 mmWeight: 0.85 kgFront thread: M90x1 female threadRear thread: M90x1 male threadSCOPE OF DELIVERYLS60FHa solar filterTransport caseInstruction manual
Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B1200 blocking-filter, and Helical focuser.The LS40THa/B1200 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B1200, this is excellent for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.FEATURESAperture: 40mm (no central obstruction, 2-lens refractor)Focal length: 400mmBandwidth: <0.7 AngstromTuning: mechanical tilt-tuningBlocking filter: B1200 with 1.25 inch connectionFocuser: Helical focuserDovetail bar at standard GP-level1/4-20 tapped base (standard thread for photo-tripods)Sol-Searcher includedWeight: 1.2kgLength: 41cmSCOPE OF DELIVERYLS40THa Solar TelescopeB1200 blocking filter in star-diagonal housing1.25 inch Helical focuserDovetail bar (GP level)Sol-SearcherInstruction manual
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Machine identifier:
Security token to identify the machine.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Facebook Pixel:
The cookie is used by Facebook to display personalized advertising offers based on user behavior to users of websites that integrate Facebook services.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.