BRESSER Full HD Deep-Sky Camera & Guider 1.25"
Product Highlights
Multi-purpose camera, can be used as an astrophoto color camera or as an autoguider for high accurate tracking
- All-round astronomical camera with SONY IMX290 CMOS colour sensor
- Planet and Deep-Sky imaging and Guiding
- Photos and videos in Full HD resolution 1936 x 1096 pixels
- Camera with ST4 autoguider function for accurate tracking
- Professional ToupSky imaging software included
- Very low noise level of the SONY CMOS sensor
- High light sensitive CMOS sensor allows short exposure times
- Easy to connect the camera via a 1.25 inch plug-in sleeve with filter thread
- ASCOM driver included ; Camera connection to PC via USB 2.0
- Operating system: WINDOWS 10 + 11
Product number:
4959050
GTIN/EAN:
4007922054377
Testbericht zu BRESSER Full HD Deep-Sky Kamera & Guider 1.25
von Reinhard Pankrath: "Mond am Taghimmel für Astro - Fotografie geeignet?"
Gefreut hatte ich mich über längere Wolkenlücken und einen offensichtlich durchsichtigen, also klaren, Himmel. Wenn man am Tag den Mond so schön sehen kann, obwohl die Sonne noch scheint, kann der Himmel nicht trübe sein und ist folglich auch für die Verwendung eines Teleskopes gut!
Was mich dann doch geärgert hat, war die fürchterliche Luftbewegung des doch so erwünscht klaren Himmels! Aber jeder Test wird erst richtig gut und aussagekräftig, desto schwieriger er durchzuführen ist. So auch hier.
Meine Erwartung schien realistisch: Wenn der Himmel zwar klar ist, aber die Sonne noch scheint, habe ich weniger Kontrast. Und das brachte mich auf die Idee, eine bestimmte Zusammenstellung meiner Geräte zu testen. Um es vorweg zu sagen: Das Ergebnis hat meine Erwartungen weit übertroffen! Aber hier der Weg dorthin:
Equipment:
• Die Bresser Exos 2 Goto Montierung
• OMC 140 deluxe Teleskop (140 / 2000), ein Rumak
• Die HD – Kamera von Bresser mit dem der neuesten Entwicklung entsprechenden back illuminated Chip von Sony
Warum so?
Erstens: Die Exos 2 ist stabil und läuft gut, habe ich sowieso für meine Teleskope. Die Alternative wäre ein Fotostativ – also ist die Wahl klar :-)
Zweitens: Das OMC wurde von Harrie Rutten berechnet inklusive des überragenden Blendensystems, das für einen optimalen Kontrast sorgt. Das sollte bei Tageslicht doch besonders geeignet sein! Eine bessere Abstimmung kann ich bei anderen Teleskopen auch nicht erwarten.
Drittens: Die HD-Kamera von Bresser hat diesen modernen Chip. Rauscharm und besonders lichtempfindlich durch die derzeit modernste Technik. Kann man bei Sony nachlesen, warum diese Technik so ist. Sehr aufwändig und deshalb auch teurer als herkömmliche Cmos (außer bei Bresser, da hat mich der Preis gewundert, andere lassen es sich besser bezahlen). Aber eben effektiv. Und die Lichtempfindlichkeit der back illuminated Chips sorgt dafür, dass die Belichtungszeiten besonders kurz gehalten werden können. Gerade bei Luftunruhe wichtig, je kürzer belichtet, desto mehr „friert“ die Luftunruhe beim Einzelbild ein. Also siehe oben. Soll die Kamera mal zeigen, was sie kann.
Jetzt muss ich etwas gestehen: Beim ersten Probieren der Kamera habe ich mich über ein gegenüber anderen Programmen komplizierteres Einstellungsmenü geärgert. Da muss man tatsächlich die Bedienungsanleitung lesen! So was! - Nun, ich sage jetzt: Gut, dass es alle diese Parameter gibt. Ein bisschen lernen hat mir auch nicht geschadet und bei diesem Test hat es sich bewährt. Da kam das zugute, was man alles regeln kann.
Das Bild war trotz des Sonnenlichthimmels NICHT flau! Korrekturen am Histogramm – bitte feinfühlig, zuviel ruiniert das Bild dann doch – an der Zeit und Verstärkung, am Weißabgleich und so weiter... haben die Aufnahme des Videos mit 1000 Bildern verarbeitungswürdig gemacht. Gut, man muss vor der Aufnahme etwas Zeit investieren, um alles den Gegebenheiten anzupassen. Einer Automatik würde ich es aber sowieso nicht überlassen. Bei Aufnahmen möchte ich doch bitte noch selber eingreifen können, um das Optimum heraus zu holen. Bei dem erreichten Kontrast konnte ich dann auch die Schärfeleistung erkennen und entsprechend fokussieren. Und so entstanden dann die Videos, bis die Wolken wieder zu dicht wurden und ich abbauen musste.
Die Bearbeitung, stacken, nachbearbeiten mit verschiedenen Freewareprogrammen, in das Format des Ergebnisses für die Veröffentlichung umwandeln, erfolgte dann wie immer. Und hier das Ergebnis. Kann man erkennen, dass die Sonne geschienen hat, als die Aufnahme entstand?
Mein Fazit: Die Kamera ist sehr gut zu gebrauchen, auch wenn die Bedingungen schwierig sind, alle Achtung.
Ich freue mich, dass ich auch so den Mond fotografieren kann und nicht immer auf die Dunkelheit warten muss. Das erweitert das Zeitfenster für mein Hobby doch sehr. Und jetzt ärgere ich mich nie mehr über viele Parameter zur Einstellung der Aufnahme! :-)
Liebe Grüße und Clear Sky
Reinhard Pankrath
Alle Bilder: Alle Rechte / Copyright bei Reinhard Pankrath
Product information "BRESSER Full HD Deep-Sky Camera & Guider 1.25""
BRESSER Full HD Deep Sky Camera with autoguider: a great camera for different types of astrophotography and for autoguiding. Not only suitable for planets, but also for deep-sky objects such as galaxies, nebulae and star clusters. Dedicated ToupSky Astro Imaging software supports video preview, video recording, video processing, image capture and processing, dark field correction and raw data output. Easy to use, but with professional results.
One of the main features of the new backlit SONY IMX290 CMOS sensor is its high light sensitivity, which makes it possible to detect deep-sky objects without active cooling. SONY has increased the quantum efficiency at 533 nm wavelength up to 77%, which is much better than other CMOS sensors have been able to achieve in the past.
Connect this camera to a guidescope and attach the camera's built-in ST-4 port, directly to your telescope's equatorial mount guide port and autoguide - using many popular audioguiding programs (PHD, Guidedog and more). Autoguiding enables you to take accurate pictures with long exposure times of several minutes. Thanks to the extra light-sensitive camera, you now always have a suitable guide star to hand, even using short exposure times. An ST-4 protocol connection cable is also included. Simple automatic tracking at its best.
You can use this camera with all guiding telescopes, or off-axis guiders that accept a 1.25 " tube, 1.25" filter thread (M28.5x0.6) or C-mount adapter thread (1 "x1 /32").
IMPORTANT NOTES:
This is not a stand-alone guider camera. You always need a Windows 10/11 computer to take pictures and for autoguiding.
The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid).
DOWNLOAD PHD2-Guiding: https://openphdguiding.org/
DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html
DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2
Download INDI Driver: https://github.com/indilib/indi-3rdparty/tree/master/indi-toupbase
SPECIFICATIONS
Field of view for different focal lengths in mm (given in arc minutes):
400mm - 48.2 'x 27.3'
500 mm - 38.6 'x 21.8'
600 mm - 32.1 'x 18.2'
700 mm - 27.5 'x 15.6'
800 mm - 24.1 'x 13.6'
900 mm - 21.4 'x 12.1'
1000 mm - 19.3 'x 10.9'
1250 mm - 15.4 'x 8.7'
1500 mm - 12.9 'x 7.3'
1750 mm - 11.0 'x 6.2'
2000 mm - 9.6 'x 5.5'
SCOPE OF DELIEVERY
One of the main features of the new backlit SONY IMX290 CMOS sensor is its high light sensitivity, which makes it possible to detect deep-sky objects without active cooling. SONY has increased the quantum efficiency at 533 nm wavelength up to 77%, which is much better than other CMOS sensors have been able to achieve in the past.
Connect this camera to a guidescope and attach the camera's built-in ST-4 port, directly to your telescope's equatorial mount guide port and autoguide - using many popular audioguiding programs (PHD, Guidedog and more). Autoguiding enables you to take accurate pictures with long exposure times of several minutes. Thanks to the extra light-sensitive camera, you now always have a suitable guide star to hand, even using short exposure times. An ST-4 protocol connection cable is also included. Simple automatic tracking at its best.
You can use this camera with all guiding telescopes, or off-axis guiders that accept a 1.25 " tube, 1.25" filter thread (M28.5x0.6) or C-mount adapter thread (1 "x1 /32").
IMPORTANT NOTES:
This is not a stand-alone guider camera. You always need a Windows 10/11 computer to take pictures and for autoguiding.
The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid).
DOWNLOAD PHD2-Guiding: https://openphdguiding.org/
DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html
DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2
Download INDI Driver: https://github.com/indilib/indi-3rdparty/tree/master/indi-toupbase
SPECIFICATIONS
- Camera type: BRESSER / Touptek GPCMOS02000KPA color
- Sensor: SONY IMX290 CMOS color, backlit
- Image and video size: Full HD 1936 x 1096 pixels (video 15 FPS)
- Native sensor size in pixels: 1936 x 1096
- Exposure times: 66µs to 16min
- Binning: YES, 2x2
- Megapixel: 2.1 MP
- Sensor size in mm: 5.6 x 3.1
- Pixel size: 2.9 µm x 2.9 µm
- Bit depth: 8/12 switchable
- ST-4 Compatible Autoguider: YES
- CNC milled housing made of aluminum
- Protective strap on the camera housing
- Camera tube diameter: 1.25 "(31.7 mm)
- Camera connection thread: C-mount + 1.25 "filter thread
- Computer interface: USB 2.0
- C-mount extension tube with 1.25 inch filter thread included
- No IR cut filter installed
-
Operating system: WINDOWS 10 + 11
- ASCOM driver included
Field of view for different focal lengths in mm (given in arc minutes):
400mm - 48.2 'x 27.3'
500 mm - 38.6 'x 21.8'
600 mm - 32.1 'x 18.2'
700 mm - 27.5 'x 15.6'
800 mm - 24.1 'x 13.6'
900 mm - 21.4 'x 12.1'
1000 mm - 19.3 'x 10.9'
1250 mm - 15.4 'x 8.7'
1500 mm - 12.9 'x 7.3'
1750 mm - 11.0 'x 6.2'
2000 mm - 9.6 'x 5.5'
SCOPE OF DELIEVERY
- Full HD camera
- C-mount adapter
- USB 2.0 PC connection cable with a length of 200cm
- Interface cable for ST-4 autoguider port with 150cm length
- Dust cap for camera tube
- Software CD
| Colour: | green |
|---|---|
| Material: | Aluminium |
Login
Accessories
%
EXPLORE SCIENTIFIC 1.25" CLS Nebula Filter
£40.00*
£58.00*
(31.03% saved)
Besides air turbulence, the brightening of the night sky is the biggest obstacle to observing faint objects beyond the solar system. Street lamps and other artificial lighting mean that the sky in human settlements is no longer really black. This affects the contrast and thus the perception of deep-sky objects. Depending on the type of celestial object, however, part of disturbing artificial light can be filtered out, making it easier to observe fainter targets.The EXPLORE SCIENTIFIC CITY LIGHT SUPRESSION - or CLS - filter uses the fact that the artificial lighting is not evenly distributed over the entire spectrum. These colours - in the case of the EXPLORE SCIENTIFIC CLS nebula filter, above all the typical colours of mercury and high-pressure lamps, used in street lighting - are suppressed, but the emissions of deep-sky objects are allowed through. With a slightly brightened sky, some relatively bright deep-sky objects are practically invisible with a telescope, for example the large galaxy M101. Using this filter makes observation much easier. A must have for any visual amateur astronomer. The EXPLORE SCIENTIFIC CLS can also be used as a useful photographic filter - helping to improve the quality of your telescopic deep sky photos.The EXPLORE SCIENTIFIC nebula filters are delivered with an individual test report - so you can be sure of receiving high-quality filters.SPECIFICATIONS:eliminates disturbing light - e.g. from street lightingenables observation of faint deep sky objectsWHAT'S INCLUDED:1x CLS filter
BRESSER Barlow Lens 2x 31.8mm/1.25"
£29.90*
With the usage of barlow lenses, you can extend the equivalent focal length of telescopes and hence increase the magnification of your observed targets. Subsequently, you can use lower power eyepieces in Barlows to act as much more powerful eyepieces, but retain the larger ocular size and more comfortable viewing that comes with lower power eyepiece designs.Due to their two lens design, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography. The black coloured Barlow element cell in this BRESSER Barlow Lens 2x 31.8mm/1.25," can be unscrewed and has the same thread as 1.25" filters, allowing it to be mounted in 1.25" eyepieces, t-adapters and other accessories, giving you flexibility of use and the ability to vary magnification in different accessories. For instance, the black Barlow cell screwed into the average length nosepiece of a standard push fit t-adapter will give around 1.6x magnification on an attached DSLR. This can be very useful when trying to get to photographic focus with some Newtonians and Solar Telescopes, which lack the necessary amount of in focus travel to get a camera to a prime focus position.FEATURESsuitable for observations and photographydoubling of the focal lengthtwo lens designfully multi-coatedWHAT'S INCLUDEDBarlow lens (1pc)
%
BRESSER Achromatic 3x (1.25") Barlow Lens
£22.00*
£32.00*
(31.25% saved)
The magnification of your telescope can be trippled with the use of this achromatic BRESSER Barlow Lens 3x 31.7 mm (1.25'').
BRESSER Barlow Lens 5x (1.25")
£49.90*
With the usage of barlow lenses, you can extend the focal distance of telescopes and enhence the magnification of your observated deep sky objects. Thus, you can use the advantages of eyepieces with greater focal distance like the long eye relief as well as a more convenient insight at higher magnifications. Due to their 3-element air-spaced lens design with ED glass, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.FEATURESsuitable for observations and photographyincrease fivefold the focal distance3-element air-spaced lens design with ED glassfully multi-coated brass eyepiece clamping ringSCOPE OF DELIVERYBarlow lens (1pc)
EXPLORE SCIENTIFIC Teleextender 2x 31.7mm/1.25"
£105.00*
With teleextenders it is possible to extend the effective focal length of a telescope system, resulting in higher magnification for the observation of the moon, the planets or small Deep-Sky objects with the same eyepieces. So you can use the advantages of eyepieces with longer focal length - such as the bigger eye distance and the more relaxed observing comfort - at high magnifications also.These teleextenders incorporate a telecentric optical design that deliveres a excellent image sharpness over the whole field of view and are premium choices for visual observations and astrophotography. The combination of excellent fully multicoating with superior optical design makes the Focal Extenders superior to classic Barlow lenses.Features: Suitable for visual observations and astrophotographyDoubling the effective total focal length of the telescopeFour lens telecentric design Fully multicoatedFilter thread for color or nebula filters
EXPLORE SCIENTIFIC Telextender 3x 31.7mm/1.25"
£108.00*
With teleextenders it is possible to extend the effective focal length
of a telescope system, resulting in higher magnification for the
observation of the moon, the planets or small Deep-Sky objects with the
same eyepieces. So you can use the advantages of eyepieces with longer
focal length - such as the bigger eye distance and the more relaxed
observing comfort - at high magnifications also.These teleextenders
incorporate a telecentric optical design that deliveres a excellent
image sharpness over the whole field of view and are premium choices for
visual observations and astrophotography. The combination of excellent fully multicoating with superior optical
design makes the Focal Extenders superior to classic Barlow lenses.Features: Suitable for visual observations and astrophotographytripling the effective total focal length of the telescopeFour lens telecentric design Fully multicoatedFilter thread for color or nebula filters
EXPLORE SCIENTIFIC Teleextender 5x 31,7mm/1.25"
£125.00*
With teleextenders it is possible to extend the effective focal length
of a telescope system, resulting in higher magnification for the
observation of the moon, the planets or small Deep-Sky objects with the
same eyepieces. So you can use the advantages of eyepieces with longer
focal length - such as the bigger eye distance and the more relaxed
observing comfort - at high magnifications also.These teleextenders
incorporate a telecentric optical design that deliveres a excellent
image sharpness over the whole field of view and are premium choices for
visual observations and astrophotography. The combination of excellent fully multicoating with superior optical
design makes the Focal Extenders superior to classic Barlow lenses.Features: Suitable for visual observations and astrophotographyExtending the effective total focal length of the telescope by a factor of 5xFour lens telecentric design Fully multicoatedFilter thread for color or nebula filters
Planetary UV + IR Cut Filter for BRESSER CMOS Cameras
£27.00*
The BRESSER UV + IR Cut Filter makes lunar and planetary images even sharper.Digital astro cameras have a wide sensitivity range that significantly exceeds the spectrum of visible light. Thus, the wavelengths of invisible light in the ultraviolet and infrared are also captured. This leads inevitably to a small additional and of course unwanted blur. The solution is this UV + IR Cut Filter, which allows only light in the visible range 400 nm to 680 nm to pass through and blocks all other wavelengths of light. As soon as these disturbing light waves are cut off, the sharpness of the image and the contrast are increased. Suddenly, details on the surface of Jupiter, for example, can be seen that were previously only barely visible. A clear plus, which can be achieved by this filter.Suitable for BRESSER CMOS cameras and other manufacturers with female camera thread M30 x 0.75 mmAfter removing the original screw adapter with sensor protection glass, the BRESSER UV + IR Cut filter is mounted to the camera instead. This filter has a fine M30 x 0.75 mm external thread for mounting on the camera. The exchange is therefore quick and easy. On the opposite side, i.e. on the telescope side, there is a standard C-mount female thread for mounting other accessories. Note: This filter does not have a standard 1.25 inch (31.7 mm) filter thread. FEATURESBRESSER UV + IR Cut Filter for photographyWavelengths of invisible light in ultraviolet and infrared are blockedPasses only visible light in the range 400nm to 680nmLunar and planetary images become even sharperSuitable for BRESSER CMOS cameras an othersMale fine thread M30 x 0.75mm for mounting on the camera housingC-Mount internal thread for mounting further accessories Quick and easy mounting of the filterGlass filter made of fine optical glassPlane-parallel polished and multiple layer coatedFilter housing made of matt black anodized aluminumHousing outer diameter 31.7mm (1.25 inch)Diameter of free light transmission 17.0mm (1.25 inch) SCOPE OF DELIVERYUV + IR Cut Filter (1 pc)
Similar products
%
Explore Scientific ASTRO R-LITE red light Flashlight
£13.00*
£16.90*
(23.08% saved)
The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)
BRESSER MikrOkular Full HD eyepiece camera
£64.99*
Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light.
FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, bmp, tif, pngvideo format avi
SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0
SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)
BRESSER Universal Smartphone Adapter Deluxe
£14.90*
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone
BRESSER BR-LP15 Cleaning kit - 3 parts
£4.90*
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely.
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass.
With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows.
FEATURES
complete set for safe cleaning of camera lenses
bellows for removing coarse dirt particles and fluff without scratching the lens
lint-free microfibre cloth approx. 14,5x14,5cm
lens cleaning pencil for safe cleaning of optical and coated glass
SCOPE OF DELIVERY
1x bellows
1x lens cleaning pen
1x microfiber cloth
BRESSER T2 Ring Nikon
£24.99*
Connect your BRESSER Microscope or Telescope with a Nikon SLR camera and take images or videos of your observed object!The BRESSER T-Mount is the connecting piece between the camera adapter and SLR camera. To find out what T2-ring you need, look into the instruction manual of your camera.FEATURESConnecting piece between the camera adapter and Nikon SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Nikon
BRESSER Viewfinder Holder 6x30 for Messier Telescope
£7.00*
BRESSER Viewfinder Holder 6x30 for Messier Telescopes Category: Spare Part
for Messier Telescope Series Description: The sturdy Viewfinder Holder 6x30 made of plastic ensures stable hold and precise alignment of the viewfinder for Messier Telescopes. Easy mounting and adjustment make it an essential accessory. With an integrated aiming hole for easier finding of the sun (solar filter for finder and telescope optics required!). Compatible with the BRESSER Messier Telescope series (not compatible with AR90/500 & AR 90/900).
BRESSER Mobile Solar Charger 21 Watt with USB and DC output
£55.00*
Self-sufficient travel with the BRESSER solar charger
Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid!
Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately.
Which devices can the solar panel charge?
The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070.Universal charger with flexible connection optionsOne USB-A connection socket is available for powering your devices. There is also an additional universal connection socket for DC bar plugs with a diameter of 5.5/2.1 mm. A universal connection cable with a 5.5/2.1mm DC bar plug on both sides and a length of 2 metres, as well as 3 plug adapters (3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-).
How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 2400mA (2.4 amps). So 3000 : 2400 x 75 = 94 minutes. Dividing the result by 60 gives the charging time in hours: 1.6 hours.This means that an average smartphone can be fully charged in just about 1.6 hours with a 21-watt solar panel.
Carabiner hook for attachment included
In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. If you attach it to your backpack, you can even use the time during a hike for charging.
Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 21 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via USB A and DC hollow plug with adaptersMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 21 wattsOutput voltage at the DC socket: 18 voltsOutput current at the DC socket: max. 1.1 ampsOutput voltage at the USB A socket: 5 voltsOutput current at the USB A socket: max. 2.4 ampsCable length of the DC connection cable: 2.0 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 290 x 195 x 35 mmDimensions when unfolded: 815 x 290 x 20 mmWeight: 1,0 kgSCOPE OF DELIVERYSolar panel 21 Watt (1 piece)Carabiner hook (2 pieces)DC connection cable (1 piece)Plug adapter (3 pieces)User manual
Vixen NPL 50° Eyepiece 8mm (1.25'')
£49.00*
The 2-group 4-element Plossl optical design of the NPL series eyepieces delivers flat and clear images with good color correction. The lenses are fully multi-coated for high light transmission.
FEATURES
Push-fit Size: 31.7 mm
Apparent field of view: 50°
Eye relief: 4.5 mm
Weight: 79 g
WHAT'S INCLUDED
1x Eyepiece 8 mm (1.25'')
EXPLORE SCIENTIFIC Hybrid Finder Scope Base - black
£23.00*
The EXPLORE SCIENTIFIC Hybrid Finder Scope Base is designed to accept all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope brackets and mini dovetail-type (e.g. Vixen, Synta, and many other brands) finder scope brackets. The base has rugged all-metal parts with black-anodized base and chrome-plated metal screws. Safety stops prevent the finder scope from sliding through and from falling when attaching screws are loosened. There are threaded holes on the left and right sides of the EXPLORE SCIENTIFIC Hybrid Finder Scope Base for desired access to attaching screws. Includes bolts and screws for mounting the base to the optical tube assembly. Direct replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopes, allowing the use of a wide range of other-brand finder scope options.FEATURESDirect replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopesAccepts all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope bracketsAccepts also mini dovetail-type fittings from e.g. Vixen, Synta and many other manufacturersRugged all-metal parts with black-anodized baseIntegrated safety stopsIncludes bolts and screws for mounting the baseBolt hole spacing 32.5mm for mounting on telescope tubeSuitable for screw diameter M4/M5 SCOPE OF DELIEVERYHybrid Finder Scope BaseBolts and screws for mounting
EXPLORE SCIENTIFIC 82° Ar Eyepiece 11mm (1,25")
£175.00*
Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics.
The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves.
All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
BRESSER Computer Cable for Remote Control of MCX Goto Telescopes and EXOS-II EQ Goto Mounts
£42.00*
For remote control of a BRESSER MCX 102/127 Goto Telescope or a BRESSER EXOS-II EQ Goto Mount via computer cable. Navigate your telescope comfortably with navigation software and Windows 10 computer. One click on the star map on the computer and the telescope is positioned on the desired object. NOTES(This list is exemplary and not exhaustive)To control a BRESSER MCX Goto telescope, no software update of the Computer Handbox is required. A direct use is therefore possible. To control a BRESSER EXOS-II EQ Goto mount, the Computer Handbox must be updated to software version v2.3 with the help of this computer cable set. This cable set is not suitable for the EXPLORE SCIENTIFIC EXOS-2 with PMC-Eight Goto. This set does not include navigation software and computer. DOWNLOAD NAVIGATION SOFTWARE (alternatively)Sky Map Pro Demo: https://nextcloud.bresser.de/s/PnQr9gyigxp9A6zSky Map Pro ASCOM PLUG-in: http://download.ascom-standards.org/plugins/SkyMapProPlugin.zip Carte Du Ciel: https://www.ap-i.net/skychart//en/startStellarium: https://stellarium.org/de FEATURESConnects a BRESSER MCX102/127 Goto to a PC Connects a BRESSER EXOS-II Goto to a PC Comfortable control by computer USB to serial adapter included Required firmware update for EXOS-II included Compatible with WIN 10 + 11SCOPE OF DELIVERYRS-232 computer cable USB 2.0 to RS-232 adapter + driver CD-Rom Firmware v2.3 for EXOS-II Goto Handbox Flash Utility Software for Handbox Update ASCOM driver for BRESSER MCX/EXOS-II Goto Operating instructions
BRESSER 10mm Plössl eyepiece 31,7mm/1,25"
£29.00*
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm)
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.
All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.
All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.
FEATURES
Focal length: 10 mm
Field of view: 50°
Lens-Design: 4 lenses in 2 groups , fully-multicoated
Housing material: completely made from metal
Rubber eyecup: YES, foldable
Filter thread: YES
Storage: Twist-pack
SCOPE OF DELIVERY
BRESSER Plössl eyepiece with rubber eyecup
Twist-pack
Customers also viewed
BRESSER HD Moon & Planetary Camera & Guider 1.25"
£121.00*
Enter the world of astrophotography now. With the new BRESSER HD moon and planet camera with ST4 autoguider function.
This camera is very good for astrophotography with short exposure times, i.e. for celestial objects like the moon, planets or star clusters. For astrophotography with long exposure times for low light deep sky objects, like galaxies and gas nebulae, we recommend the BRESSER Full HD Deep-Sky Camera (Art. No. 4959050) instead, with it's even higher resolution and sensor sensitivity.
Equipped with the new high-sensitivity SONY IMX225 CMOS colour sensor, the BRESSER HD moon and planet camera delivers amazing image results with very short exposure times, even with simple telescope equipment. In addition, this ultra-modern camera can also be used as an autoguider, e.g. to actively track the main imaging device with SLR or CCD astro camera. A universal CMOS colour camera that delivers super-sharp lunar and planetary images in particular.
The particularly low noise level of this new chip generation from SONY, ensures an exceptionally high brilliance and no cooling is required. Due to the high native pixel resolution of 1280x980, together with suitable telescopes, very beautiful images of the moon, but also detailed planetary images are possible.
The ToupSky pro software included in the scope of delivery not only offers the necessary basic functions for image and video recording, but also many helpful special functions for image post-processing and for setting up the Guider. Functions such as live image display, exposure settings, white balance, dark image capture, stacking, timelapse recordings and much more can be individually configured. Especially the very sophisticated software makes it really easy for you to get started in astrophotography. With the automatic settings, you can produce absolutely presentable results without much prior knowledge. If you wish, simply switch off the automatic settings and gradually venture into the individual professional settings.
Connect the camera directly to the ST4 connector of your telescope mount and you have fully automatic tracking control. This makes long exposures of several minutes possible without the stars producing unwanted line marks due to the ever-present synchronisation fluctuations of a telescope mount. A corresponding ST-4 connection cable is even included with the camera. Due to the high light sensitivity of the camera, you will always find a suitable guide star even with very short exposure times. For connection to guide tubes or off-axis guiders, the camera has a 1.25" plug-in sleeve, 1.25" filter thread (M28.5x0.6) and C-mount thread (1 "x1/32").
IMPORTANT NOTES:
This is not a stand-alone guider camera. You always need a Windows 10 / 11 computer to take pictures and for autoguiding.
The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid).
DOWNLOAD PHD2-Guiding: https://openphdguiding.org/
DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html
DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2
SPECIFICATIONS
Camera type: BRESSER / Touptek GPCMOS01200KPF color
Sensor: SONY IMX225 CMOS colour
Image and video size: Full HD 1280 x 960 pixels (video 30-54,4 FPS)
Native sensor size in pixels: 1280 x 960
Exposure times: 102ms to 16min
Binning: YES, 1x1 and 2x2
Megapixel: 1.2 MP
Sensor size in mm: 4.8 x 3.6
Pixel size: 3.75 µm x 3.75 µm
Bit depth: 8/12 switchable
ST-4 Compatible Autoguider: YES
CNC milled housing made of aluminum
Protective strap on the camera housing
Camera tube diameter: 1.25 inch (31.7 mm)
Camera connection thread: C-mount + 1.25 "filter thread
Computer interface: USB 2.0
C-mount extension tube with 1.25 inch filter thread included
No IR cut filter installed
Operating system: WINDOWS 10 + 11
ASCOM and WDM driver included
Field of view for different focal lengths in mm (given in arc minutes):
400 mm - 41,2'x 30,9'
500 mm - 33'x 24,7'
600 mm - 27,5'x 20,6'
700 mm - 23,5'x 17,7'
800 mm - 20,6'x 15,4'
900 mm - 18,3'x 13,7'
1000 mm - 16,5'x 12,4'
1250 mm - 13,2'x 9,9'
1500 mm - 11'x 8,2'
1750 mm - 9,4'x 7,1'
2000 mm - 8,2'x 6,2'
SCOPE OF DELIEVRY
HD camera
C-mount adapter
USB 2.0 PC connection cable with a length of 180cm
Interface cable for ST-4 autoguider port with 150cm length
Dust cap for camera tube
Software CD
BRESSER BinoViewer Deluxe 1.25''
£410.00*
You see better with two eyesThe BRESSER BinoViewer Deluxe makes it possible to observe astronomical objects in a relaxed way with both eyes and with considerably more detail than using one eye. The images created of the moon, planets and globular clusters are particularly impressive. But also with deep-sky objects such as the Orion Nebula the detection of details is much easier. At the same time this binoviewer is very easy to handle. Thanks to the newly patented optical system you can get into focus with any telescope. All you need is a pair of identical eyepieces to enjoy this dramatic and immersive viewing experience.How to use the BinoViewer? Since the BRESSER BinoViewer Deluxe does not require an additional light path (back focus), it can be used with any telescope - including Newtonians and short focus refracting telescopes, which traditionally suffered when using standard binoviewers. No light path corrector or similar accessory is necessary. If a standard 1.25'' eyepiece can be focused, the binoviewer will also work. The eyepiece focal length and field of view size of the eyepieces used are fully retained. As with binoculars one eyepiece is focused first using the telescope focuser. Then the second eyepiece can be brought into focus using the helical focuser on the binoviewer. The required interpupillary distance is then elegantly adjusted to a range of 58–74mm with the help of a linear sliding mechanism, with graduated marker, to help you find your ideal interocular setting quickly. Self-centring helical eyepiece grips, rather than side-mounted thumbscrew eyepiece retainers are used, decreasing the chance of offsetting collimation of both eyepiece to each other. The fact that this design of binoviewer uses a well-engineered linear slide mechanism to adjust interpupillary distance, rather than a cheaper-to-produce traditional hinged design also helps retention of collimation.Which objects can be observed with this accessory?Actually, all objects that were previously observed with the telescope in question, but only monocularly with one eye. Because there is no magnification factor at the binoviewer, even low magnifications can be achieved. This makes not only the moon, planets and globular clusters, but also the brighter deep-sky objects very interesting observation targets. The use of two eyes leads to a more relaxed view than using one eye alone. Although true depth of field viewing at infinity is a little beyond most telescopes and binoviewers, users will note how the human brain attempts to impose depth of field ("3d-like") effects on stereo views through binoviewers. The biggest difference that most observers comment upon when comparing views through binoviewers like these, as opposed to single monocular eyepiece views, is the extra detail that can be seen in most observable targets. Relaxed viewing and extra detail in objects are the two main benefits of binoviewing, which the BRESSER Bino Viewer Deluxe 1.25'' delivers in abundance.Also ideal as an accessory for solar telescopesA very special application is the use of the BRESSER BinoViewer Deluxe in combination with all solar telescopes. The spherical shape of the sun with all its surface details is shown very impressively. The depth of field effects of seeing filaments silhouetted against the solar surface are particularly enjoyable to observe.Important note: Do not use the BRESSER Binoviwer Deluxe without a suitable solar telescope or a safe solar filter in front of the telescopes objective lens . Otherwise, there is an acute risk of going blind.High-quality mechanics and materialsThe entire BRESSER BinoViewer Deluxe is made of high-quality materials. Except for the outer plastic covers all components are made of anodised aluminium. Particularly remarkable are the low-backlash sliding mechanism for adjusting the interpupillary distance and the precise rotary clamping of both eyepiece adapters. The wide clamping surface holds the eyepieces in place securely and also centres them automatically on the optical axis. The one-sided dioptric adjustment has a backlash-free helical drive and enables the finest corrections. For safe transport a high-quality hard-shell transport case is included in the scope of delivery.Which eyepieces can be used?All eyepieces with a 1.25'' barrel and a field stop of up to 22mm. Depending on the interpupillary distance the outer diameter of the eyepiece housing should not exceed a value of approximately 50 mm.Filter thread 1.25'' availableNo 2nd filter sets are necessary to operate the BRESSER Binocular Approach Deluxe. The desired colour or nebula filter can be screwed directly into the 1.25'' nosepiece. in this configuration, when changing the eyepieces to affect a change in magnification, no swapping of filters is necessary. Unique mirror-lens system with Ohara (Japan) lanthanum glass material The BRESSER Binocular Viewer Deluxe is equipped with a unique mirror-lens system. This has the advantage of higher light transmission and less color aberration. The resulting image is simply brighter and sharper. To achieve this the exclusive Ohara (Japan) lanthanum glass material has been used and in addition all optical surfaces are equipped with a full multi-layer broadband coating. Finally the beam-splitting mirror has a 99% dielectric coating and completes the excellent optical design.FEATURESEnables binocular observations with all telescopesRelaxed and comfortable viewingThree-dimensional viewing experienceSuitable for all telescopes with 1.25'' eyepiece connectionNo additional light path requiredNo magnification factor at the binocular attachmentEven low magnifications with large fields of view are achievableFor observing moon, planets and deep sky objectsPrecise and robust mechanicsSliding mechanism to adjust the interpupillary distanceDioptric compensation via fine helical driveWide eyepiece rotation clamp with automatic centeringFilter thread 1.25'' (M28.5 x 0.6mm) availableLens and mirror design made of finest Ohara (Japan) lanthanum glass materialAdvanced broadband multilayer coating on all optical surfaces99 % dielectric-coated beam-splitting mirrorHigh-quality hard-shell carrying case includedWHAT'S INCLUDEDBino Viewer DeluxeDust capsCarrying case
%
EXPLORE SCIENTIFIC MPCC Field Flatt.ED APO+NikonT2
£73.00*
£145.00*
(49.66% saved)
The image plane of many telescopes is not plane, but curved. This results in a picture that has its optimal focus only in the center of the field of view - the edge of the field is out of focus and thus unsharp. The human eye is able to accomodate most of this but a camera will show stars that get increasingly unsharp towards the edge of the field. The Explore Scientific Multi Purpose Curvature Corrector eliminates field curvature in a variety of telescopes - Explore Scientific Apos and many other refractors and cassegrain telescopes. This increases the edge sharpness in the image drastically. Improves edge sharpness not only with Explore Scientific Apos, but also with many other refractor and cassegrain telescopes. This image field leveller fits all Nikon DSLR cameras, but can also be used for other camera types due to the universal T2 thread connection. This requires an optional camera-specific T2 ring. SPECIFICATIONSImage flattener for Nikon DSLR cameras Eliminates the field curvature of ED APO telescopes Can also be used for various cassegrains The image sharpness at the edge is drastically increased 2 inch/50.8mm push-in connector with filter thread T2 threaded connection (M42x0,75mm) Full multi-coating on all lens surfacesStainless steel housing Adapter for Nikon F bayonet included DELIVERY SCOPE Bildfeldebner Nikon (1 piece)
NATIONAL GEOGRAPHIC Astro Planetarium - Multimedia
£99.99*
Your own planetarium at home! Projects the stars on the ceiling, accurate to time and day! You can even see falling stars, thanks to the planetarium's integrated motor. Listen to background music with the built-in FM radio or by connecting to a digital music player.FEATURESProjection screen: approx. 1.6m x 2.2m (at 2m range)Lumen power: 190 lm (at 2 m celling height)Projection of stars or star constellationsBuilt-in radio function and speakersConnection for MP3 playerSCOPE OF DELIVERYMultimedia planetarium2 slide discsStandBatteries
BRESSER Bluetooth speaker with alarm clock and wireless charging function
£59.00*
The BRESSER Bluetooth speaker not only has a modern design, it also gives you great sound wherever and whenever you want it, so you can enjoy your music for up to 6 hours without interruption. The built-in microphone makes it easy to take calls. The Bluetooth speaker also features wireless charging, a USB charging port and a 4400mAh battery to charge your mobile devices. The time and alarm are displayed on the stylish fabric-covered housing.
FEATURESLED time display with adjustable brightness
Wireless charging 5W
Operating time: up to 6 hours
Dual alarm with snooze function
Built-in microphone
AUX-IN for connecting to external audio sources (cable included)
Dimensions: 204 x 79 x 109 (mm)
SCOPE OF DELIVERYWireless speaker with alarm clock
Instruction manual
Micro USB charging cable
Vixen Wide Photo Adapter 60DX for Nikon
£149.00*
The Wide Photo Adapter 60DX connects your Nikon DSLR camera to your telescope via a 60 mm thread. Thanks to the use of new materials and an improved design, Vixen was able to significantly improve the precision and load capacity compared with conventional adapters. The adapter's large interior diameter prevents shadows at the edges of the image when using a full-frame DSLR camera.FEATURESIncreased material strength for additional stability6 screws hold the camera in position (compared with 4 on most conventional adapters)Screw tips with Delrin inserts prevents the camera from tilting and minimizes distortion.Large interior diameter prevents shadowingBlack interior prevents scattered lightCompatible with 60 mm accessories when the camera adapter is removed2 screw sets (L and S) prevent scratches on the camera housing2 screw sets for adjusting the rotation resistanceDELIVERY CONTENTVixen Wide Photo Adapter 60DX for Nikon cameras2 screw sets (L and S)
NATIONAL GEOGRAPHIC Automatic 70/350 Telescope
£422.99*
The computer-controlled refractor telescope is a wide-field-lens telescope that goes with you
almost anywhere, due to its compact design. Take it with you wherever you go,
whether you're hiking, camping or on vacation. Perfect for beginners: the telescope includes an easy-to-use
go-to system.
The computer-controlled refractor telescope can be operated on a desk or with the included tripod. It will
show numerous craters on the moon, the cloud belts on Jupiter and Saturn's rings. These are just
the beginning of what can be seen with this telescope. The hand control computer of this telescope
solves the beginner's biggest challenge: aligning the telescope with the night sky and finding
celestial objects in the vast, starry firmament. The menu navigation of the hand control computer is also multilingual and offers the settings of German, English, French, Spanish and Italian.FEATURESRefractor telescope for beginnersThanks to its compact dimensions also ideal as a travel telescopeComputer control for automatic finding of celestial objectsSCOPE OF DELIVERYRefractor telescope 70/350Aluminium tripod with accessory trayGOTO handcontrolEyepieces (10 and 20 mm)Moon filterRotatable star mapCompas with integrated bubble levelAstronomy software (download)6x Mignon AA batteries are required for operation of the motor - not included!