Has your 5-in-1 external sensor for your BRESSER WiFi colour weather centre succumbed to the impact of your child’s football or your last house move? Then it’s time for a replacement. And you don’t need to buy the whole product! This 5-in-1 external sensor is the perfect replacement part for your weather centre. It takes no time to install: Establish the power supply, take the mounting materials from the packaging and fit the wireless sensor at your preferred spot as normal. The existing base station will connect to the replacement external sensor automatically as normal. And if the two devices can’t find one another? You can manually intervene: Simply press the WiFi/SENSOR button on the base station and it will start to search for the new wireless sensor. Once connected, the local measured values for wind speed, wind direction, humidity, temperature and precipitation will be transmitted via 868 MHz to your colour display.
Good prospects again: Get the full functionality from your WiFi colour weather sensor again with the 5-in-1 external sensor.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. For all units with a lower LOT number, you need the sensor with item number 7802510. You can check the LOT number on your unit as well as on the packaging.
FEATURES
Replacement wireless sensor, transmits data to the WiFi colour weather centre
Measures wind speed, wind direction, humidity, external temperature and precipitation
Transmission frequency: 868 MHz
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERY
Multifunctional external sensor
Mounting materials
No base station included
Instruction manual
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
Compatible with these BRESSER weather stations:
7000023, 7007201, 7004200, 9604200, 7007511, 9600028, 7000012CM3000, 7000012GYE000, 7000013, 9070600, 7000028, 7007402, 9070700, 9604210, 7004210, 7006500, 9604100, 9070300, 9070110, 7007520, 9070710, 7000030, 7007610, 7000002, 7000004, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7001800QT5000, 7001800CM3000, 7001800GYE000, 7007550CM3000, 7007600QT5000, 7000022CM3000, 7007500, 7007501, 9080600, 8020210GYE000, 8020210CM3000, 7004330, 7004340
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
Did you accidentally drop your 5-in-1 outdoor sensor during your last move or while replacing the batteries? Accidents such as these can easily happen. However, that's no reason to purchase a new BRESSER 5-in-1 professional weather centre. This replacement sensor allows you to restore all the functions of your existing base station. As usual, the sensor is easy to set up: simply insert 3 AA batteries (not included) and secure the sensor in a freely accessible location using the enclosed mounting materials. Once you've mounted the sensor, you just need to manually connect the old base station to the replacement outdoor sensor. To do this, hold down the SCAN button on the base station for approximately 2 seconds, and then press the reset button on the sensor. Wait a few moments until a signal is received, after which you will be able to view your local weather data. The base station will display the wind speed, wind direction, humidity, temperature and precipitation.
Don't lose track of the weather - get the right spare part for your existing professional weather centre with the 5-in-1 outdoor sensor.
FEATURES
Replacement wireless sensor, sends data to the professional weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate wind and rain data
Power supply: 3x AA batteries (not included)
DELIVERY CONTENT
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz.
Good news for Smarthome owners: The sensor can be connected to the system of the market leader Tuya.
Suitable for the following BRESSER weather stations: 7902535, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003230, 7003210, 7003200, 7003220, 7003510, WSX5003, 7002531, 7002571, 7003100
Compatible with the following BRESSER weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 7002580, 7002581 und 7002585/WSX1001
FEATURES
Temperature measuring
Humidity measuring
7 channels settable
RC frequency: 868 MHz
Extra long radio range of 150 meters!
Suitable for smarthome systems by Tuya
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home.
The pool sensor is compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 7002531
FEATURES
Floating pool sensor for measuring the water temperature
LCD display for displaying the temperature (°C/°F)
Wireless frequency: 868 MHz
Wireless transmission range of up to 30 m to optional base station
7 available channels
Waterproof (IPX7)
Powered by 2x AA batteries (not included)
DELIVERY CONTENT
Pool thermometer
Instruction manual
It's easily done: you've just moved house and want to move your 7-in-1 professional sensor for your BRESSER Wi-Fi Comfort weather centre to a new location. While attempting to move the sensor, you accidentally drop it and the sensor stops working. If this sounds like you, this 7-in-1 wireless sensor is just what you need for your weather station. The setup is the same as usual: simply insert the batteries (not included) and install your replacement sensor in the desired location using the mounting materials provided. Once you've installed the sensor, all you need to do is connect it to your existing base station (not included). Simply press the Wi-Fi/Sensor button on the base station, and the base station will search for the signal from your new outdoor sensor. The two devices will then automatically connect to each other. The local data from your sensor, including the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity will appear on your elegant colour display.
Restore full functionality to your Wi-Fi Comfort weather centre with the 7-in-1 replacement sensor.
FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
DELIVERY CONTENT
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels.
The lightning detector is compatible with the following BRESSER weather stations:
7003210, 7003220, 7003230, 7003240
FEATURES
Lightning sensor for measuring lightning strikes
Displays a light signal when a lightning strike is detected
The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour
LED indicator for data transmission
Range of up to 100 metres
Adjustable sensor sensitivity (high/medium/low)
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Lightning sensor
Instruction manual
Thermo/Hygro sensor suitable for the BRESSER Thermo/Hygrometer weather station with the article numbers: 95-01200, 95-01201, 95-01202 & 70-07400This outdoor sensor for weather stations, article numbers: 7009993, 7009995 or 7009996.FEATURESSuitable for the following BRESSER weather stations: 9501200, 9501201, 9501202 & 70074003 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included)SCOPE OF DELIVERYThermo/Hygrometer
Falling under the car when moving, taking a knock from a child's football, simply slipping from your hand during installation - even the most robust 7-in-1 wireless sensor is not immune to everyday misadventure. But, even if your outdoor sensor is permanently damaged beyond repair, there's no need to buy a whole new weather station simply to keep an eye on the weather. Your base station can continue to function perfectly. This sensor is the perfect replacement part for your 4-day 4CAST WiFi weather centre. The device is operated in much the same way as you are used to: Start by inserting the batteries (not included). Then, fit the replacement sensor in your preferred location using the installation material supplied. Once everything has been tightened up, all you need to do is connect to your base station (not included). With a replacement sensor, this is not an automatic process; you will needed to press the WiFi/SENSOR button on the console. The console will then start to search for the signal from the sensor. Connected? Then you're done, and you can start enjoying up-to-date and local weather data from your sensor for outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level and light intensity.
Rehabilitate your 4-day 4CAST WiFi weather centre with the replacement sensor.
FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 420 x 170 x 213 mm
DELIVERY CONTENT
Wireless sensor with installation material
Base station not included!
Instruction manual
This BRESSER soil sensor can be used as an add-on or replacement part for your Smart Garden watering system, and provides all the data you need to ensure your garden receives just the right amount of water. Ideal for flower beds, vegetable plots or lawns, it can be placed at a distance of up to 60 metres from your Smart Garden water timer. Once you've positioned the soil sensor, you can connect it to your weather station (not included), add it to the HomGar app and pair it with your water timer (not included) to obtain an overview of the soil moisture and temperature in the app interface or on the colour display of your Smart Garden station (not included). Based on these precise measurements, your Smart Garden watering system can optimise the flow of water - for example, if you connect a water timer (not included), you can use the app to configure the desired soil moisture and automatically stop your watering schedules when the preset soil moisture is reached.* Discover the BRESSER soil sensor and keep your garden in shape with precise measurements for your Smart Garden watering system!
FEATURES
Soil sensor for the BRESSER smart home watering systemProvides data for automatically adjusting your watering schedules in order to avoid overwatering*
Measures the soil humidity and temperature
Range for connection with water timer (not included): up to 60 metres
LED display of different moisture levels to help you save water
Data refresh frequency: 5 mins
Power supply: 3x AAA batteries (not included)
Dimensions: 135 x 135 x 95 mm, Weight: 175 g
DELIVERY CONTENT
Smart Garden soil sensor
Base station and water timer not included!
Instruction manual
*NOTE: Only use this function under supervision.
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories!
The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station.
The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates.
An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator.
For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions.
This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information
WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase
wake-up function Ice/Frost warning
Interior temperature (°C / °F) Humidity with comfort display
Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature
weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display
Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included
Calcium-K module in straight extension tube, for using normal astronomical telescopes up to 100mm aperture and up to 1620mm focal length as Ca-K solar telescopes.This Calcium-K module transforms your normal astronomical refractor telescope into a Ca-K solar telescope. It will be very easy: Put the Ca-K module into the 2" focuser of your telescope, and you are ready for solar observing in the light of the Calcium-K wavelength.Internal narrowband filters allow for a <2.4 Angstrom bandwidth. For refractor telescopes up to 100mm aperture and up to 1620mm focal length. For imaging it will be better to use a bigger Ca-K module.The Ca-K module is in a straight extension tube, for 2" focuser on the telescope side, and with T2 thread and 1.25" eyepiece connection on the eyepiece side.All needed filter parts are integrated inside the compact module. There are no additional filters needed.The Ca-K wavelength is at the edge of the visible light spectrum for human eyes, so for many people visual observing is difficult. However, all details could be captured photographically. Therefore the Ca-K Module is optimized primarily for imaging.FEATURESBandwidth <2.4 AngstromUsable at telescopes up to 100mm aperture and 1620mm focalStraight extension tube housing2" slide tube for 2" focuserConnection for 1.25" eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYCa-K module in straight extension tube for 2" focuserIntegrated blocking filter B1800 for telescopes up to 1620mm focal lengthInstruction manual
£2,898.00*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Machine identifier:
Security token to identify the machine.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Facebook Pixel:
The cookie is used by Facebook to display personalized advertising offers based on user behavior to users of websites that integrate Facebook services.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.