BRESSER 5-in-1 Outdoor Sensor for Weather Stations 7002510/7002511/7002512/7002513 from LOT Number 1156743 and 7002580
Product Highlights
The perfect replacement sensor for your WiFi colour weather centre: This 5-in-1 external sensor can be ‘on the air’ with your current, local weather data in no time at all.
5-in-1 external sensor for WiFi colour weather centre (7002580)
Product information "BRESSER 5-in-1 Outdoor Sensor for Weather Stations 7002510/7002511/7002512/7002513 from LOT Number 1156743 and 7002580"
Has your 5-in-1 external sensor for your BRESSER WiFi colour weather centre succumbed to the impact of your child’s football or your last house move? Then it’s time for a replacement. And you don’t need to buy the whole product! This 5-in-1 external sensor is the perfect replacement part for your weather centre. It takes no time to install: Establish the power supply, take the mounting materials from the packaging and fit the wireless sensor at your preferred spot as normal. The existing base station will connect to the replacement external sensor automatically as normal. And if the two devices can’t find one another? You can manually intervene: Simply press the WiFi/SENSOR button on the base station and it will start to search for the new wireless sensor. Once connected, the local measured values for wind speed, wind direction, humidity, temperature and precipitation will be transmitted via 868 MHz to your colour display.
Good prospects again: Get the full functionality from your WiFi colour weather sensor again with the 5-in-1 external sensor.
PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. For all units with a lower LOT number, you need the sensor with item number 7802510. You can check the LOT number on your unit as well as on the packaging.
FEATURES
Replacement wireless sensor, transmits data to the WiFi colour weather centre
Measures wind speed, wind direction, humidity, external temperature and precipitation
Has your 5-in-1 external sensor for your BRESSER WiFi colour weather centre succumbed to the impact of your child’s football or your last house move? Then it’s time for a replacement. And you don’t need to buy the whole product! This 5-in-1 external sensor is the perfect replacement part for your weather centre. It takes no time to install: Establish the power supply, take the mounting materials from the packaging and fit the wireless sensor at your preferred spot as normal. The existing base station will connect to the replacement external sensor automatically as normal. And if the two devices can’t find one another? You can manually intervene: Simply press the WiFi/SENSOR button on the base station and it will start to search for the new wireless sensor. Once connected, the local measured values for wind speed, wind direction, humidity, temperature and precipitation will be transmitted via 868 MHz to your colour display.
Good prospects again: Get the full functionality from your WiFi colour weather sensor again with the 5-in-1 external sensor.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. For all units with a lower LOT number, you need the sensor with item number 7802510. You can check the LOT number on your unit as well as on the packaging.
FEATURES
Replacement wireless sensor, transmits data to the WiFi colour weather centre
Measures wind speed, wind direction, humidity, external temperature and precipitation
Transmission frequency: 868 MHz
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERY
Multifunctional external sensor
Mounting materials
No base station included
Instruction manual
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
Compatible with these BRESSER weather stations:
7000023, 7007201, 7004200, 9604200, 7007511, 9600028, 7000012CM3000, 7000012GYE000, 7000013, 9070600, 7000028, 7007402, 9070700, 9604210, 7004210, 7006500, 9604100, 9070300, 9070110, 7007520, 9070710, 7000030, 7007610, 7000002, 7000004, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7001800QT5000, 7001800CM3000, 7001800GYE000, 7007550CM3000, 7007600QT5000, 7000022CM3000, 7007500, 7007501, 9080600, 8020210GYE000, 8020210CM3000, 7004330, 7004340
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
Did you accidentally drop your 5-in-1 outdoor sensor during your last move or while replacing the batteries? Accidents such as these can easily happen. However, that's no reason to purchase a new BRESSER 5-in-1 professional weather centre. This replacement sensor allows you to restore all the functions of your existing base station. As usual, the sensor is easy to set up: simply insert 3 AA batteries (not included) and secure the sensor in a freely accessible location using the enclosed mounting materials. Once you've mounted the sensor, you just need to manually connect the old base station to the replacement outdoor sensor. To do this, hold down the SCAN button on the base station for approximately 2 seconds, and then press the reset button on the sensor. Wait a few moments until a signal is received, after which you will be able to view your local weather data. The base station will display the wind speed, wind direction, humidity, temperature and precipitation.
Don't lose track of the weather - get the right spare part for your existing professional weather centre with the 5-in-1 outdoor sensor.
FEATURES
Replacement wireless sensor, sends data to the professional weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate wind and rain data
Power supply: 3x AA batteries (not included)
DELIVERY CONTENT
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz.
Good news for Smarthome owners: The sensor can be connected to the system of the market leader Tuya.
Suitable for the following BRESSER weather stations: 7902535, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003230, 7003210, 7003200, 7003220, 7003510, WSX5003, 7002531, 7002571, 7003100
Compatible with the following BRESSER weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 7002580, 7002581 und 7002585/WSX1001
FEATURES
Temperature measuring
Humidity measuring
7 channels settable
RC frequency: 868 MHz
Extra long radio range of 150 meters!
Suitable for smarthome systems by Tuya
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home.
The pool sensor is compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 7002531
FEATURES
Floating pool sensor for measuring the water temperature
LCD display for displaying the temperature (°C/°F)
Wireless frequency: 868 MHz
Wireless transmission range of up to 30 m to optional base station
7 available channels
Waterproof (IPX7)
Powered by 2x AA batteries (not included)
DELIVERY CONTENT
Pool thermometer
Instruction manual
It's easily done: you've just moved house and want to move your 7-in-1 professional sensor for your BRESSER Wi-Fi Comfort weather centre to a new location. While attempting to move the sensor, you accidentally drop it and the sensor stops working. If this sounds like you, this 7-in-1 wireless sensor is just what you need for your weather station. The setup is the same as usual: simply insert the batteries (not included) and install your replacement sensor in the desired location using the mounting materials provided. Once you've installed the sensor, all you need to do is connect it to your existing base station (not included). Simply press the Wi-Fi/Sensor button on the base station, and the base station will search for the signal from your new outdoor sensor. The two devices will then automatically connect to each other. The local data from your sensor, including the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity will appear on your elegant colour display.
Restore full functionality to your Wi-Fi Comfort weather centre with the 7-in-1 replacement sensor.
FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
DELIVERY CONTENT
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels.
The lightning detector is compatible with the following BRESSER weather stations:
7003210, 7003220, 7003230, 7003240
FEATURES
Lightning sensor for measuring lightning strikes
Displays a light signal when a lightning strike is detected
The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour
LED indicator for data transmission
Range of up to 100 metres
Adjustable sensor sensitivity (high/medium/low)
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Lightning sensor
Instruction manual
Thermo/Hygro sensor suitable for the BRESSER Thermo/Hygrometer weather station with the article numbers: 95-01200, 95-01201, 95-01202 & 70-07400This outdoor sensor for weather stations, article numbers: 7009993, 7009995 or 7009996.FEATURESSuitable for the following BRESSER weather stations: 9501200, 9501201, 9501202 & 70074003 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included)SCOPE OF DELIVERYThermo/Hygrometer
Falling under the car when moving, taking a knock from a child's football, simply slipping from your hand during installation - even the most robust 7-in-1 wireless sensor is not immune to everyday misadventure. But, even if your outdoor sensor is permanently damaged beyond repair, there's no need to buy a whole new weather station simply to keep an eye on the weather. Your base station can continue to function perfectly. This sensor is the perfect replacement part for your 4-day 4CAST WiFi weather centre. The device is operated in much the same way as you are used to: Start by inserting the batteries (not included). Then, fit the replacement sensor in your preferred location using the installation material supplied. Once everything has been tightened up, all you need to do is connect to your base station (not included). With a replacement sensor, this is not an automatic process; you will needed to press the WiFi/SENSOR button on the console. The console will then start to search for the signal from the sensor. Connected? Then you're done, and you can start enjoying up-to-date and local weather data from your sensor for outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level and light intensity.
Rehabilitate your 4-day 4CAST WiFi weather centre with the replacement sensor.
FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 420 x 170 x 213 mm
DELIVERY CONTENT
Wireless sensor with installation material
Base station not included!
Instruction manual
This BRESSER soil sensor can be used as an add-on or replacement part for your Smart Garden watering system, and provides all the data you need to ensure your garden receives just the right amount of water. Ideal for flower beds, vegetable plots or lawns, it can be placed at a distance of up to 60 metres from your Smart Garden water timer. Once you've positioned the soil sensor, you can connect it to your weather station (not included), add it to the HomGar app and pair it with your water timer (not included) to obtain an overview of the soil moisture and temperature in the app interface or on the colour display of your Smart Garden station (not included). Based on these precise measurements, your Smart Garden watering system can optimise the flow of water - for example, if you connect a water timer (not included), you can use the app to configure the desired soil moisture and automatically stop your watering schedules when the preset soil moisture is reached.* Discover the BRESSER soil sensor and keep your garden in shape with precise measurements for your Smart Garden watering system!
FEATURES
Soil sensor for the BRESSER smart home watering systemProvides data for automatically adjusting your watering schedules in order to avoid overwatering*
Measures the soil humidity and temperature
Range for connection with water timer (not included): up to 60 metres
LED display of different moisture levels to help you save water
Data refresh frequency: 5 mins
Power supply: 3x AAA batteries (not included)
Dimensions: 135 x 135 x 95 mm, Weight: 175 g
DELIVERY CONTENT
Smart Garden soil sensor
Base station and water timer not included!
Instruction manual
*NOTE: Only use this function under supervision.
Did you accidentally drop your 5-in-1 outdoor sensor during your last move or while replacing the batteries? Accidents such as these can easily happen. However, that's no reason to purchase a new BRESSER 5-in-1 professional weather centre. This replacement sensor allows you to restore all the functions of your existing base station. As usual, the sensor is easy to set up: simply insert 3 AA batteries (not included) and secure the sensor in a freely accessible location using the enclosed mounting materials. Once you've mounted the sensor, you just need to manually connect the old base station to the replacement outdoor sensor. To do this, hold down the SCAN button on the base station for approximately 2 seconds, and then press the reset button on the sensor. Wait a few moments until a signal is received, after which you will be able to view your local weather data. The base station will display the wind speed, wind direction, humidity, temperature and precipitation.
Don't lose track of the weather - get the right spare part for your existing professional weather centre with the 5-in-1 outdoor sensor.
FEATURES
Replacement wireless sensor, sends data to the professional weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate wind and rain data
Power supply: 3x AA batteries (not included)
DELIVERY CONTENT
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
It's easily done: you've just moved house and want to move your 7-in-1 professional sensor for your BRESSER Wi-Fi Comfort weather centre to a new location. While attempting to move the sensor, you accidentally drop it and the sensor stops working. If this sounds like you, this 7-in-1 wireless sensor is just what you need for your weather station. The setup is the same as usual: simply insert the batteries (not included) and install your replacement sensor in the desired location using the mounting materials provided. Once you've installed the sensor, all you need to do is connect it to your existing base station (not included). Simply press the Wi-Fi/Sensor button on the base station, and the base station will search for the signal from your new outdoor sensor. The two devices will then automatically connect to each other. The local data from your sensor, including the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity will appear on your elegant colour display.
Restore full functionality to your Wi-Fi Comfort weather centre with the 7-in-1 replacement sensor.
FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
DELIVERY CONTENT
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
The new BRESSER Wi-Fi colour Weather Station with a 5-in-1 professional sensor offers a wide range of data in a compact device. The advanced, multifunctional outdoor sensor is easy to mount with the supplied mounting accessories.
The outdoor sensor transmits measurements for wind speed, wind direction, humidity, temperature and precipitation to the base station at a frequency of 868 MHz.
The clearly structured 5.7" colour display on the base station also displays a range of historical data. It enables internal storage and evaluation of the measured data over a 24-hour period. Using the measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is indicated on the display by graphical symbols.
You can also use the Wi-Fi function to access your local weather data via Weather Underground. The Wi-Fi function also enables Internet time synchronisation and firmware updates.
There is a programmable alarm function for maximum and minimum values, which can emit an acoustic alarm and light signal if either value is reached. A special frost/ice warning alarm can also be configured for outdoor temperatures below -3 °C. A poor indoor climate can pose a particular health risk for children and the elderly. The BRESSER Wi-Fi colour weather station offers a smart feature to help tackle this. The indoor climate indicator uses symbols to visualise the current status of the indoor climate.
For fans of the moon, the display also indicates the various phases of the moon. An alarm with snooze function is also included.
FEATURES
5.7" colour display for detailed time and weather information
WiFi connection with internet time synchronisation
Receives weather data from the 5-in-1 sensor and wireless thermo-hygro sensor over 868 MHz frequency
Publish local weather station data on the internet via websites such as Weather Underground and Weather Cloud
Time, calendar, day of the week and moon phase display
Alarm function
Ice/frost warning
Indoor temperature (°C/°F) and humidity with comfort indicator
Outdoor temperature (°C/ °F) and humidity display
Displays gusts and average wind speed
Precise wind direction display (16 directions)
Precipitation quantity (hourly, daily, weekly, monthly, total precipitation)
Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow)
Atmospheric pressure display
Perceived outdoor temperature
Weather index for dewpoint, windchill factor and heat index
Min./max. memory (up to 24 hours)
Alarm with LED indicator
Weather calibration
3 different display brightness levels High/Low/Off
7 languages for days of the week
Firmware updates supported
Supports wireless 5-in-1 professional weather sensor (included)
Supports up to 7 additional wireless sensors (optional) (item no.: 7009999)
DELIVERY CONTENT
Base station
Professional 5-in-1 outdoor sensor with mounting accessories
100-240 V/50 Hz power adapter and cable
FEATURES5.7'' colorful display for time and detailed weather informationWIFI connection with internet time synchronizationReceives weather data from 5in1 profi sensor and from wireless thermo-hygro sensor via 868 MHz transmissionPublish local weather station data on weather underground and weather cloudDisplays time, calendar, weekday and moon phaseAlarm clockIce pre-alert functionIndoor temperature (°C/°F) and humidity with comfort indicationOutdoor/Channel’s temperature (°C/°F) and humidity readingsGust or average wind speedWind direction (16-direction indicator)Rain rate (hourly, daily, weekly, monthly, total rainfall)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Barometric pressure in relative or absolute readings (hPa, inHg, mmHg)Smart outdoor “Feels like” sensation readingWeather index for outdoor feels like, dew-point, Wind chill, Heat indexMax/Min memory records and past 24 hours (hourly record)Hi/Lo alert with flash LED indicatorWeather calibration (on set-up UI)3-mode brightness: Hi / Lo / Off7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU)Support firmware update (TBC)Support a wireless 5-in-1 professional weather sensor (Included)Support up to 7 pcs wireless extra sensors (Optional) (item no. 7009999)
DELIVERY SCOPEMain unitProfessional 5in1 sensor incl. mounting material100-240V/50 Hz power adapter and cable
The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very
compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for
the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included!
The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and
precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a
multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected
measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols
on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined
value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated.
A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol.
Furthermore, the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the ''moonstruckers'' also the different phases of the moon are shown. An alarm function with snooze mode is also integrated.
FEATURES
5-in-1 outdoor multi sensor
Inside temperature (°C/°F) and humidity
Outside temperature (°C/°F) and humidity
Wind direction and speed
Graphical weather trend display (12 hours)
Beaufort index (scale for the classification for wind speeds)
Precipitation rate with history (day/week/month)
Air pressure with history (24 hours)
Heat index
Dew point
Radio controlled time and date setting
Phases of the moon
Alarm function
Ice/frost warning
Min/Max memory (up tp 24 hours)
LED background light, amber
SCOPE OF DELIVERY
Base station with stand
5-in-1 Multisensor with mounting material
Manual
Additionally, 6 AA batteries are required (not included)
PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging:
Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802520.
Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.
If you have a 7-in-1 ClimateScout Weather Station, this additional base station allows you to access the full range of functions and weather data in an additional room. For example, by placing the additional base station in your bedroom, you can view the measurements from your outdoor sensor and decide what to wear for the day based on the weather conditions. The original base station can then be kept in your living room to give everyone in your household an overview of the outdoor temperature, outdoor humidity, wind speed, wind direction, rainfall, UV and light intensity. With this additional base station, you can see what the weather is doing from both rooms! The base station also has a sleek, elegant design that was designed specially for BRESSER and fits in with all interior styles.
Monitor your indoor climate with an additional ClimateScout base station
In addition to the data from your outdoor sensors (not included), the additional base station also shows you indoor measurements. Is mould likely to develop in your bathroom? Is the air in your baby's bedroom too dry? Simply place the additional station in the corresponding location and the built-in sensor will show you the indoor temperature (°C/°F), humidity and air pressure. Happy or sad smiley, with or without drops: Thanks to the graphical indoor climate indicator, you can quickly ascertain the current comfort level and take appropriate action to improve your indoor climate. There is also a weather alarm, which allows you to set your desired maximum and minimum weather values independently of your other base station. Your additional base station will inform you when the temperature, humidity, rainfall, wind speed and other values reach your preset limits.
Radio-controlled clock
In addition to a modern design, the weather console also features a radio controlled clock that syncs the time via a DCF signal and automatically switches between winter and summer time. If you need an early start, the base station also has a built-in alarm. If you need a few extra minutes in bed, simply press the snooze button to silence the alarm for 5 minutes. During the winter, you can enable the frost alarm, which makes the alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The intuitive display also shows The day of the week, date and phases of the moon at the top of the screen.
View your weather data in an extra room with this additional base station!
BASE STATION FEATURES
Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency
Clear, professional display with time and comprehensive weather information
Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours)
Room climate indicator
Maximum and minimum value alarm
Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals
DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time
Alarm with snooze function and frost warning
Time, calendar, day of the week and moon phase display
Min./max. memory (up to 24 hours)
Backlight
Displays the graphical weather trend (12 hours)
Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2)
Displays the Beaufort index (scale for measuring wind speed)
Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator
Weather index display for dewpoint, windchill factor and heat index
Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT)
Can be wall-mounted or placed on desktop
Base station dimensions: 180 x 135 x 22 mm (W x H x D)
Display size: 125 x 77 mm (W x H)
Power supply: 4x AA (not included)
DELIVERY CONTENT
Additional base station
External sensor not included!
Instruction manual
A breath of fresh air for fresh air enthusiasts, the BRESSER 7-in-1 Weather Center Weather Station Air-Mon merges locally measured weather data with current internet air quality values for your home, featuring a modern weather station with app and color display.
Weather station with outdoor sensor for a complete meteorological overview
Quickly mounted, the 7-in-1 wireless sensor in conjunction with the stylish base station including integrated thermo-hygrosensor and barometer, swiftly delivers accurate measurements. Look forward to local information about temperature, humidity, air pressure, wind speed, wind direction, precipitation, UV levels, and light intensity. For a broader weather outlook, just check the reliable 7-day forecast including maximum and minimum temperatures. Retrieve meteorological history through the max/min value memory.
Fully connected – smart use of the Wi-Fi weather station
Specific current air quality values appear via the Wi-Fi connection on the elegant color display. Not at home? Access all data via the intuitive ProWeatherLive App or through a web browser – anytime, anywhere!
Breathe deeply again with the air quality monitor
The air we breathe matters – protecting our health from pollutants around us is crucial. Therefore, the weather station displays the 6 most important pollutant values in your environment: carbon monoxide, nitrogen dioxide, sulfur dioxide, ozone, as well as fine particulate matter PM2.5 and PM10. And because these are many values, the AQI (Air Quality Index) provides a summarized assessment of the current air quality.
Red, yellow, or green – the traffic light as a comfort indicator
Is the air too poor for Sunday coffee on the terrace? The comfort level traffic light, available for each air quality factor, gives the answer. Conveniently, indoor temperature and humidity, as well as UV radiation, are also equipped with a traffic light indicator. This allows you to see at a glance the status of indoor climate and the likelihood of sunburn.Premium weather station with additional potential: the extensions
In addition to its main functions, the weather station already includes useful features such as automatic time display, moon phases, and an alarm clock. A well-rounded package indeed. And there's more: The BRESSER weather station, with rain gauge, wind gauge, and more, can be tailored to your individual needs with optionally available additional sensors. Optional devices (not included) allow you to easily check, for example, the pool temperature, soil moisture in your flowerbed, or indoor climate in multiple rooms. A CO2 sensor (not included) and an HCHO/VOC sensor (not included) provide even more insights into local air quality. Browse through the compatible BRESSER accessories for individual extensions.
Make the 7-in-1 Weather Center Weather Station Air-Mon the new centerpiece of your home.
BASE STATION FEATURESWeather station with air quality monitor
Wi-Fi connection for retrieving and sharing local data on platforms like ProWeatherLive, WeatherUnderground, and Weathercloud
Display of internet data on local AQI (Air Quality Index) and the 6 key pollutants (PM2.5, PM10, NO2, SO2, O3, CO)
Comfort level traffic light for air quality measurements, UV levels, and indoor climate
Display of precise measurements from the 7-in-1 outdoor sensor
(Outdoor temperature, humidity, wind speed, wind direction, precipitation, UV levels, light intensity)
Indoor temperature (°C/°F) and humidity
Current weather and 7-day forecast with max/min temperatures
Air pressure
Weather and air quality alert functions
Weather data calibration
Max/min value memory
Time and date (internet time synchronization)
Moon phase, sunrise and sunset
Alarm clock with snooze function and frost warning
Expandable with the following optional sensors for direct measurement on site:
Up to 3x thermo-hygro, soil, and/or pool sensor (not included)
1x PM2.5/10 sensor (not included)
1x CO2 sensor (not included)
1x CO sensor (not included)
1x HCHO and VOC sensor (not included)
Suitable for table or wall mounting
Power supply: AC adapter (included), CR2032 backup battery (not included)
7-IN-1 OUTDOOR SENSOR FEATURESMeasuring temperature and humidity
Measuring wind speed, direction, and precipitation
Measuring UV levels and light intensity
Solar panel for extending battery life
Range: up to 150 m
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERYBase station
7-in-1 wireless sensor
Power adapter
Operating instructions
£282.99*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Machine identifier:
Security token to identify the machine.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Facebook Pixel:
The cookie is used by Facebook to display personalized advertising offers based on user behavior to users of websites that integrate Facebook services.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.