BRESSER 40mm Plössl eyepiece 31,7mm/1,25"

Product Highlights

BRESSER 40mm Plössl

  • Focal length: 40 mm
  • Field of view: 46°
  • Lens-Design: 4 Lenses in 2 Groups , fully-multicoated
  • Housing material: completely made from metal
  • Rubber eyecup: YES, foldable
  • Filter thread: YES
  • Storage: Twist-pack

£35.00*

Available

Product number: 4920240
GTIN/EAN: 4007922042237
Product information "BRESSER 40mm Plössl eyepiece 31,7mm/1,25""
BRESSER 40mm Plössl Eyepiece 1,25" (31,7mm)

Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.

All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.

All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.

FEATURES
  • Focal length: 40 mm
  • Field of view: 46°
  • Lens-Design: 4 lenses in 2 groups , fully-multicoated
  • Housing material: completely made from metal
  • Rubber eyecup: YES, foldable
  • Filter thread: YES
  • Storage: Twist-pack
SCOPE OF DELIVERY
  • BRESSER Plössl eyepiece with rubber eyecup
  • Twist-pack
Colour: black
Eyecups: Rubber eyecups, foldable
Material: Metal

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessories

BRESSER BR-LP15 Cleaning kit - 3 parts
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

£4.90*

Similar products

%
Explore Scientific ASTRO R-LITE red light Flashlight
The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)

£13.00* £16.90* (23.08% saved)
BRESSER MikrOkular Full HD eyepiece camera
Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light. FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, bmp, tif, pngvideo format avi SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0 SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)

£64.99*
BRESSER Universal Smartphone Adapter Deluxe
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

£14.90*
BRESSER BR-LP15 Cleaning kit - 3 parts
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

£4.90*
BRESSER T2 Ring Nikon
Connect your BRESSER Microscope or Telescope with a Nikon SLR camera and take images or videos of your observed object!The BRESSER T-Mount is the connecting piece between the camera adapter and SLR camera. To find out what T2-ring you need, look into the instruction manual of your camera.FEATURESConnecting piece between the camera adapter and Nikon SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Nikon

£24.99*
BRESSER Viewfinder Holder 6x30 for Messier Telescope
BRESSER Viewfinder Holder 6x30 for Messier Telescopes Category: Spare Part for Messier Telescope Series Description: The sturdy Viewfinder Holder 6x30 made of plastic ensures stable hold and precise alignment of the viewfinder for Messier Telescopes. Easy mounting and adjustment make it an essential accessory. With an integrated aiming hole for easier finding of the sun (solar filter for finder and telescope optics required!). Compatible with the BRESSER Messier Telescope series (not compatible with AR90/500 & AR 90/900).

£7.00*
BRESSER Mobile Solar Charger 21 Watt with USB and DC output
Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070.Universal charger with flexible connection optionsOne USB-A connection socket is available for powering your devices. There is also an additional universal connection socket for DC bar plugs with a diameter of 5.5/2.1 mm. A universal connection cable with a 5.5/2.1mm DC bar plug on both sides and a length of 2 metres, as well as 3 plug adapters (3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 2400mA (2.4 amps). So 3000 : 2400 x 75 = 94 minutes. Dividing the result by 60 gives the charging time in hours: 1.6 hours.This means that an average smartphone can be fully charged in just about 1.6 hours with a 21-watt solar panel. Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. If you attach it to your backpack, you can even use the time during a hike for charging. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 21 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via USB A and DC hollow plug with adaptersMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 21 wattsOutput voltage at the DC socket: 18 voltsOutput current at the DC socket: max. 1.1 ampsOutput voltage at the USB A socket: 5 voltsOutput current at the USB A socket: max. 2.4 ampsCable length of the DC connection cable: 2.0 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 290 x 195 x 35 mmDimensions when unfolded: 815 x 290 x 20 mmWeight: 1,0 kgSCOPE OF DELIVERYSolar panel 21 Watt (1 piece)Carabiner hook (2 pieces)DC connection cable (1 piece)Plug adapter (3 pieces)User manual

£55.00*
Vixen NPL 50° Eyepiece 8mm (1.25'')
The 2-group 4-element Plossl optical design of the NPL series eyepieces delivers flat and clear images with good color correction. The lenses are fully multi-coated for high light transmission. FEATURES Push-fit Size: 31.7 mm Apparent field of view: 50° Eye relief: 4.5 mm Weight: 79 g WHAT'S INCLUDED 1x Eyepiece 8 mm (1.25'')

£49.00*
BRESSER 10mm Plössl eyepiece 31,7mm/1,25"
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

£29.00*
EXPLORE SCIENTIFIC Hybrid Finder Scope Base - black
​The EXPLORE SCIENTIFIC Hybrid Finder Scope Base is designed to accept all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope brackets and mini dovetail-type (e.g. Vixen, Synta, and many other brands) finder scope brackets. The base has rugged all-metal parts with black-anodized base and chrome-plated metal screws. Safety stops prevent the finder scope from sliding through and from falling when attaching screws are loosened. There are threaded holes on the left and right sides of the EXPLORE SCIENTIFIC Hybrid Finder Scope Base for desired access to attaching screws. Includes bolts and screws for mounting the base to the optical tube assembly. Direct replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopes, allowing the use of a wide range of other-brand finder scope options.FEATURESDirect replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopesAccepts all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope bracketsAccepts also mini dovetail-type fittings from e.g. Vixen, Synta and many other manufacturersRugged all-metal parts with black-anodized baseIntegrated safety stopsIncludes bolts and screws for mounting the baseBolt hole spacing 32.5mm for mounting on telescope tubeSuitable for screw diameter M4/M5 SCOPE OF DELIEVERYHybrid Finder Scope BaseBolts and screws for mounting

£23.00*
%
EXPLORE SCIENTIFIC 2" CLS Nebula Filter
Besides air turbulence, the brightening of the night sky is the biggest obstacle to observing faint objects beyond the solar system. Street lamps and other artificial lighting mean that the sky in human settlements is no longer really black. This affects the contrast and thus the perception of deep-sky objects. Depending on the type of celestial object, however, part of disturbing artificial light can be filtered out, making it easier to observe fainter targets.The EXPLORE SCIENTIFIC CITY LIGHT SUPRESSION - or CLS - filter uses the fact that the artificial lighting is not evenly distributed over the entire spectrum. These colours - in the case of the EXPLORE SCIENTIFIC CLS nebula filter, above all the typical colours of mercury and high-pressure lamps, used in street lighting - are suppressed, but the emissions of deep-sky objects are allowed through. With a slightly brightened sky, some relatively bright deep-sky objects are practically invisible with a telescope, for example the large galaxy M101. Using this filter makes observation much easier. A must have for any visual amateur astronomer.  The CLS can also be used as a useful photographic filter - helping to improve the quality of your telescopic deep sky photos.The EXPLORE SCIENTIFIC nebula filters are delivered with an individual test report - so you can be sure of receiving high-quality filters.SPECIFICATIONS:eliminates disturbing light - e.g. from street lightingenables observation of faint deep sky objectsWHAT'S INCLUDED:1x nebula filter

£57.00* £83.00* (31.33% saved)
EXPLORE SCIENTIFIC 82° Ar Eyepiece 11mm (1,25")
Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

£175.00*

Customers also bought

BRESSER 10mm Plössl eyepiece 31,7mm/1,25"
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

£29.00*
BRESSER Messier AR-90L/1200 EXOS-1/EQ4
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.Ambitious beginners and advanced observers alike will see the finest details of our Moon and Planets with the BRESSER Messier AR-90L telescope. Watch details on Mars like the white polar ice-cap, the Cassini division on the ring of Saturn or the great-red-spot on Jupiter. Scanning the lunar terminator is simply a pleasure. You will never give the BRESSER Messier AR-90L Telescope away voluntarily. Because of the extra long focal length ratio F/13.2 this telescope offers incredible sharpness and contrast but extremly low color-aberration. Mount and Tripod. The BRESSER Messier beginners series of telescopes. Within this series you find smaller optics mounted stable on the new BRESSER EXOS 1 mount. This combination means more value for money and puts an end to flimsy beginners scopes which discourage most of the beginners due to small, under engineered mounts. The EXOS 1 with a robust stainless steel tripod bears optical tubes weighing up to 7kg stable for visual observation. The optional motor drive for the RA axis makes usage even more comfortable, so there is no need of manual tracking and the object is kept steadily in the field of view. CHARACTERISTICS OPTICS Optical design: refractor telescopeLens diameter: 90 mm / focal length: 1200 mm / F/13.3Maximum recommended magnification: 180x Telescope for night and solar observationHigh-quality BRESSER refractor opticsIdeal telescope for planets, double stars and planetary nebulae31.7 mm (1.25") diagonal mirror6x30 straight through viewfinder reticleOptimized finder socket for comfortable useCradle ring with piggyback camera holder (1/4 thread)Smartphone camera adapter for sky navigation includedUniversal 44 mm Dovetail adapter (fits LXD75/Great Polaris/EQ5)Rack and Pinion focuser 31.7mm / 1.25" CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Circular bubble level for easy horizontal alignment Stable height-adjustable stainless steel tripod Retrofittable with a tracking motor for the right ascension axis Pole height scale for setting the latitude Scaled graduated circular rings for easier finding of objects by means of star atlas or planetarium software Tripod weight: 4.7 kg Mount weight: 4 kg (without counterweight) Total weight incl. counterweight: 10.7 kg SCOPE OF DELIVERY 90 mm refractor telescope tube assembly Aperture solar-filterEyepiece: 26 mm Super Ploessl 31.7 mm (1.25") 6x30 viewfinder  Tube clamp  Smartphone adapter for celestial navigation31.7 mm (1.25") diagonal mirror  EXOS 1 German equatorial mount Stainless steel tube field tripod 1 x 2 kg counterweight PC Software Stellarium Manual

£457.00*
BRESSER Pollux-II 150/1400 EQ3 Reflector Telescope with Smartphone Adapter & Solar Filter
Explore the beauties of the night sky with this complete telescope set. Everything is included so that you can get started immediately with the fascinating hobby of astronomy: the astronomical reflector telescope with 150 mm aperture and 1,400 mm focal length, the equatorial mount, the tripod and extensive accessories for exciting observations. Especially important for beginners: the system is very easy to use. Particularly the Moon, the planets and the Sun appear impressive through the Pollux-II. Powerful performance for your first celestial observations – the telescope Take your first steps in astronomy with this classic reflector telescope of the "Newton" type. Because it is equipped with an additional lens inside the focuser, it belongs to the group of the so-called "catadioptric" optics. One advantage of this combination of lens and mirror: despite the large focal length, the telescope tube is relatively short and therefore easily transportable. In addition, you can look forward to a comfortable observation position at all times. This is because with telescopes of this design you do not look in at the back of the telescope, but at the front and laterally. So you don't have to bend down, even if the reflector telescope is pointed vertically upwards at the sky. The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 1,400 mm focal length result in a focal ratio (ratio of aperture to focal length) of 1 to 9.3 (F/9.3). This allows you to enjoy viewing your favourite objects at high magnifications with good contrast. Admire especially the planets or details on the Moon through the entry-level telescope. But also some deep sky objects are very nice to observe: open star clusters, globular clusters and bright planetary nebulae such as the Ring Nebula M57 in the constellation Lyra can be seen beautifully through this astronomical telescope. But how close can you get to the celestial eye-catchers? The 150 mm aperture achieves a resolving power that allows magnifications of up to 300x with sharp images. The technical possibilities go far beyond this – theoretically up to 1,050x using the included accessories. However, as the magnification increases, the sharpness of the image can slowly decrease. In addition, high magnification also requires the right environmental conditions. For no matter through which telescope you look, the air turbulence in the atmosphere (seeing conditions) always influences your observation and magnification possibilities. Note for nature lovers: If you choose a Newtonian telescope like the Pollux-II reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Solid base for gazing skywards – mount and tripod Have you found the perfect location for your journey of discovery into the night sky? Then simply mount your astronomical telescope with the equatorial mount on the height-adjustable aluminium tripod. The special feature of this type of mount: after the so-called "alignment", the positioning of an axis parallel to the Earth's axis, the movement of the celestial bodies only has to be compensated for on this one axis. To do this, you simply point the axis approximately at Polaris. This is a huge advantage over the azimuthal mount, where both axes are moved simultaneously. In addition, the two flexible shafts with fine adjustment make adjusting and tracking the telescope very precise and comfortable. And to ensure that accessories are always at hand, they can be stored on the handy shelf between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Everything you need, night and day – the accessories The astronomical telescope comes with a wide range of equipment so that you can start admiring the Moon, planets or the Sun straight away. At night, the LED viewfinder helps you keep an overview of the sky. Once installed parallel on the tube and correctly aligned, the small red dot shows you where the telescope is pointing when you look through it. This way, you can align the optics precisely and find celestial bodies more quickly before you then take a closer look with the high magnification. Varying views of the universe: the two eyepieces allow you to marvel at your observation objects in different magnifications. They are simply inserted into the telescope's focuser using their sockets with a standardised 1.25 inch (31.7 mm) diameter. You want to see even more details? Then go for the 3x barlow lens, which triples the magnification of the eyepieces. If you would like to make astronomical discoveries even during the day, use the solar filter to observe the star of our own solar system. It allows you to easily and safely observe sunspots and granulation on the sun. CAUTION: Never point the telescope at the sun without the solar filter! Capture special highlights easily – with the smartphone adapter, you use your smartphone as a camera for your telescope. This way you can quickly take your first photos of the Moon or the Sun, for example, and get started in astrophotography. FEATURES Reflector telescope with 150 mm aperture and 1,400 mm focal length Reflector type catadioptric Well suited for observing the Sun, Moon and planets Height-adjustable tripod with equatorial EQ3 mount Precise adjustment through flexible shafts and fine adjustment in both axes Easy to use, very suitable for beginners Focal ratio F/9.3, therefore good for observing the planets and details on the moon 1.25 inch (31.7 mm) eyepiece focuser Two eyepieces and one barlow lens with 1.25 inch (31.7 mm) extension tubes for different magnifications Safe solar observation with the included solar filter Entry into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software download Instruction manual

£345.00*

Customers also viewed

BRESSER 25mm Plössl eyepiece 31,7mm/1,25"
BRESSER 25mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 25 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

£29.00*
BRESSER Messier MC-152/1900 Hexafoc EXOS-2 GOTO
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The BRESSER Messier MC-152 excells due to its high rigidity and compact optics. The long focal length of this telescope facilitates relaxed observations with high magnifications - the compact size makes it the perfect mobile telescope. 150mm aperture enable you to observe bright nebulas in the depth of space. Find the remnants of a gigantic stellar explosion in the year 1054 in the constallation Taurus or scan the glowing bands of the Great Orion Nebula. Detect the famous Whirlpool Galaxy in the Big Dipper or find the Dumpbell-Nebula in the constellation Vulpecula. The high rigidity of the EXOS-2 mount allows for relaxed observations and is helpful for those making their first attempts at astrophotography.CHARACTERISTICS OPTICSTelescope for night and solar observationHigh-quality BRESSER Maksutov-Cassegrain optics Ideal for planets, double stars and planetary nebulaeHigh-end Hexafoc-focuser with 2,5" free inner diameter6x30 straight through viewfinder with reticle; optimized finder socket for comfortable useAperture ratio: f/12,5Eyepiece diameter: 31.7 mm (1.25") and 50.8 mm (2")31.7 mm (1.25") diagonal mirrorCradle rings with handle and integrated piggyback camera holder (1/4 thread)Smartphone camera adapter for sky navigation includedUniversal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5)50.8 mm (2") to 31.7 mm (1,25") adapter with integrated T2 thread (T2-adapter ring for your camera is needed) CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm ) Load capacity up to 13 kg payload Circular bubble for easy horizontal alignment GoTo Mount with motors and hand box controller, for easy finding and guiding moon, planets, stars and much more ST-4 compatible autoguider interface Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Adjustable pole finder scope with optional illumination Tripod weight: 4.7 kg Mount weight: 6.7 kg (without counterweight) Total weight incl. counterweight: 15.9 kg Batteries: not included SCOPE OF DELIVERY Optical Tube Assembly Maksutov-Cassegrain 152/190026 mm Super Plössl eyepiece (31.7 mm / 1.25") Integrated 31.7 mm and T2 adapter Adapter for 50.8 mm (2") Tube rings Handle with camera holderUniversal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5)Adjustable polar finder scope with optional illumination 6x30 Viewfinder 31,7 mm (1.25") zenith mirror Smartphone adapter for celestial navigation Aperture solar-filter Astronomy PC software Stellarium Rotatable star mapEquatorial EXOS 2 GOTO mount and Startracker handheld computer Stainless steel tube field tripod with accessory tray 1 x 4.5 kg counterweight

£1,523.00*
BRESSER 10mm Plössl eyepiece 31,7mm/1,25"
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

£29.00*
BRESSER 30mm Plössl eyepiece 31,7mm/1,25"
BRESSER 30mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 30 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

£29.00*