LUNT LS300THaDS/B3400 H-alpha solar telescope

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-51 glass, 130mm aperture and 910mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1800 blocking filter. Solar observing in H-alpha: The LS130MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 130mm free aperture (no central obstruction) and 910mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking-filter is the B1800. The B1800 is good for visual solar observing and also solar imaging is possible by cameras with small to large sensor chips. We recommend a LS130MT with B3400 blocking-filter by using cameras with very large sized sensor chips. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. Then the 3-lens apochromatic refractor can be used as a normal telescope with 130mm aperture and 910mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the R&P focuser of the telescope. Please note that the optionally available conversion kit 0551696 is only absolutely necessary for the LS130MT version with B3400 blocking filter if the telescope is also to be used at night. The conversion kit is not required for the versions with B1200 and B1800. More applications: With additionally available accessories the LS130MT offers even more possibilities! - Double-Stack The LS130MT telescope can optionally be upgraded with the additionally available double-stack module LS130MT/DSII (item number 0551690). The DSII system is a internal double-stack module with Pressure-Tuner. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter can be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelengthThe additionally available "LUNT Ca-K Filter Module for LS130MT" (item number 0551697) can be used on the LS130MT to observe and photograph super-granulation and other effects visible at this wavelength on the sun. This makes the LS130MT a completely universal usable apochromatic telescope of highest quality! FEATURES 3-lens APO refractor, FPL-51 Aperture: 130mm (no central obstruction) Focal length: 910mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B1800 with 1.25" and T2 connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 12.1kg Length with blocking filter and dew-shield: 100cm Length without blocking filter and removed dew-shield: 80cm SCOPE OF DELIVERY LS130MT Multipurpose Telescope Pressure-TunerB1800 blocking filter in star-diagonal housingTube extension for using without H-alpha Etalon 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (92 x 42 x 35 cm) Instruction manual

Please note: This telescope is made to customer specifications. Therefore special conditions apply for this telescope and online ordering is not possible. Please contact our customer service if you would like to order this telescope.Complete H-alpha solar telescope with 300mm aperture and a bandwidth of <0.65 Angstroms. With Feather-Touch focuser, innovative air pressure tuning system and B3400 blocking filter.A really giant telescope for observing the Sun in H-alpha wavelength, a precisely adjusted refractor with a free aperture of 300mm without central obstruction and 2128mm focal length. A internal Etalon filter with the innovative air pressure tuning system Pressure-Tuner achieve a bandwidth of <0.65 Angstroms. The Pressure-Tuner system ensures a homogeneous H-alpha image and optimal performance. The Etalon is safely installed inside the telescope. The air pressure tuning system is precisely controlled by an electronic pressure tuner controller.Blocking Filter is the B3400. The B3400 is well suited for imaging the Sun. For visual observation we recommend an additional zenith mirror. The straight extension tube, in which the blocking filter is installed, is equipped as standard with a 2" eyepiece holder and also with an adapter for 1.25". Focusing is done by the legendary Feather-Touch focuser from Starlight-Intruments with 10:1 reduction.FEATURESAperture: 300mm (no central obstruction)Focal length: 2128mmBandwidth: internal Etalon with <0.65 AngstromsTuning: Air-pressure tuning systemElectronic pressure tuner controllerBlocking filter: B3400 with 2" and 1.25" connectionFocuser: Feather-Touch focuser from Starlight-Instruments with 10:1 reductionDovetail bar with Losmandy level for astronomical mountsWeight: ?kgLength: ?cmSCOPE OF DELIVERYLS300THa H-alpha solar telescopePressure-TunerElectronic pressure tuner controllerB3400 blocking filter in straight extension tubeFeather-Touch focuserDovetail bar (Losmandy level)Manual

​​Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100mm aperture and 714mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1800 blocking filter. Solar observing in H-alpha: The LS100MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 100mm free aperture (no central obstruction) and 714mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking-filter is the B1800. The B1800 is very good for visual solar observing. Also solar imaging is possible by cameras with small to large sensor chip. We recommend a LS100MT with B3400 blocking-filter by using cameras with very large sensor chips. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100mm aperture and 714mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430. Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night. More applications: With additionally available accessories the LS100MT offers even more possibilities! - Double-Stack The LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelength Certainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun. This makes the LS100MT a completely universal usable apochromatic telescope of highest quality! FEATURES 3-lens APO refractor, FPL-53 Aperture: 100mm (no central obstruction) Focal length: 714mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B1800 with 1.25" and T2 connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 6.8kg Length with blocking filter and dew-shield: 84cm Length without blocking filter and removed dew-shield: 65cm SCOPE OF DELIVERY LS100MT Multipurpose Telescope Pressure-Tuner B1800 blocking filter in star-diagonal housing 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (78x33x23cm) Instruction manual Conversion kit for observation of the starry night sky (0551430) not included!

High-quality eyepiece for beginners who want high-quality results at an affordable price. The 2-group, 4-element Plossl lens design of the NPL eyepieces ensures clear and sharp images with good colour correction. The lenses are fully multi-coated for high light transmission, the eyepieces also offer a comfortable eye distance. In contrast to predecessor models, the chromatic aberration has been further reduced and you will be impressed by the sharpness of the edges. FEATURES Plug-in diameter: 31.7 mm Apparent field of vision: 50° Eyepoint distance: 3.0 mm Weight: 70 g WHAT’S INCLUDED 1x eyepiece 6 mm (1.25”) and protective caps

BRESSER EXOS-2 GoTo Equatorial Mount. Mount, tripod and hand box with computer. This German mount has tracking motors in both axes that follow celestial objects very precisely.The handbox with GoTo works reliable and controls the mount in every situation. Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds.The battery pack (12 V) is conveniently fastened to the tripod shelf and takes eight size "D" batteries.The mount rests on a very tough and rigid stainless steel tripod and can take optical tubes of up to 13 kg. GOTO - Stargazing at the push of a button! The Startracker GoTo System enables beginners to start astronomical observations in just a few minutes, and guides you to objects that are hard to localize through a standard finder scope.Just push the button and the GoTo System will find planets, nebulae or galaxies for you and position your telescope automatically and precise.The GoTo System database includes thousands of astronomical objects.The Messier mount with GoTo System allows you to observe without tedious searching, or image faint objects that are hard to find in a standard finder scope.The BRESSER StarTracker GoTo systems uses servo motors for both axes and features an ST-4 compatible autoguiding input. Guiding aggressivity can be set on the mount itself. The menu navigation of the Startracker Handbox is also multilingual and offers the settings of German, English, French, Spanish and Italian.CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm ) Load capacity up to 13 kg payload Circular bubble for easy horizontal alignment GoTo Mount with motors and hand box controller, for easy finding and guiding moon, planets, stars and much more ST-4 compatible autoguider interface Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 6.7 kg (without counterweight) Total weight incl. counterweight: 15.9 kg Batteries: not included SCOPE OF DELIVERY Equatorial EXOS 2 GOTO mount with stainless steel tripod and Startracker handcontroller Adjustable polar finder scope with optional illumination Stainless steel tube field tripod with accessory tray 1 x 4.5 kg counterweight