Product information "BRESSER Professional 7-in-1 Wi-Fi Weather Station with Light Intensity and UV Measurement Function"
Compared with the Professional 6-in-1 Wi-Fi Weather Station (item no. 7002540000000), the new BRESSER Professional 7-in-1 Wi-Fi Weather Station has a new light intensity measurement function.
The 7-in-1 weather station measures a wide range of meteorological data directly in your vicinity, which can be viewed remotely via the internet. If you require additional functions, the weather station can be expanded with a range of optional sensors:
BRESSER soil temperature and moisture meter (item no. 7009972)
BRESSER Spa and pool thermometer (item no. 7009973)
FEATURES OF BASE STATION
Wi-Fi connection with internet time synchronization and support for firmware updates
Automatic or manual time setting
Publish your weather data on Wunderground or Weathercloud
Displays indoor temperature (°C/ °F) and humidity (%)
Outdoor temperature (°C/ °F) and humidity (%)
Light intensity (Klux / Kfc / W/m²)
Displays the current UV index, exposure level and recommended protection
Displays sunburn time (mins) based on current UV level
Wind direction and speed (m/s; km/h; Knoten; mph)
Beaufort index (scale for measuring wind speed)
Air pressure with 24-hour history (hPa/inHg/mmHg)
Rainfall with history (day/week/month)
Graphical weather forecast for next 12-24 hours
Weather index (‘feels like’ function, dew point, heat index, wind chill factor)
Trend indicator shows the weather trends for the next few minutes
Visual comfort level indicator for room temperature and humidity
Phases of the moon
Sunrise and sunset times
Alarm with snooze function (5 minutes)
Weekday alarm
Min/max memory (up to 24 hours)
Ice/frost warning
LED backlight, amber-coloured
Wall bracket and table stand
Supports a 7-in-1 sensor and up to 7 indoor sensors (includes 1x 7-in-1 sensor and 1x indoor sensor)
Dimensions: 215 x 172 x 29 mm and weight: 639 g
Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included)
Security type: supports WPA3 encryption as of firmware 1.09
FEATURES OF 7-IN-1 OUTDOOR SENSOR
Measurement of temperature, humidity, wind speed, wind direction, precipitation quantity, UV level and light intensity
Powered via a large movable solar panel
In case of insufficient sunlight operation via 3x AA batteries (not included)
Range: up to 150 m
Dimensions: 390 x 174 x 465 mm
FEATURES OF INDOOR SENSOR
Measures the indoor temperature and humidity
Transmission range: up to 150 m
RF frequency: 868 MHz
Transmission interval: 60 seconds
Wall bracket and table stand
Power supply: 2x AA batteries (not included)
Dimensions: 60 x 113 x 39.5 mm and weight: 144 g
SCOPE OF DELIVERY
Base station with stand
7-in-1 multi-sensor with mounting materials
Thermometer/hygrometer
Power adapter
Instruction manual
Body material:
Plastic
Colour:
black, grey
Features:
Alarm clock function, Automatic Internet Time, Backlight, Beaufort Index, Compatible with online weather platforms, High/low alarm, History data storage, Ice warning, Indoor climate indicator, Max./min. value memory, Moon phases, Storm warning, Sunburn time, Sunrise and sunset, Temperature alarm, Time and date, WIFI, Weather forecast, Weather index, Weekday display, multicolour display
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz.
Good news for Smarthome owners: The sensor can be connected to the system of the market leader Tuya.
Suitable for the following BRESSER weather stations: 7902535, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003230, 7003210, 7003200, 7003220, 7003510, WSX5003, 7002531, 7002571, 7003100
Compatible with the following BRESSER weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 7002580, 7002581 und 7002585/WSX1001
FEATURES
Temperature measuring
Humidity measuring
7 channels settable
RC frequency: 868 MHz
Extra long radio range of 150 meters!
Suitable for smarthome systems by Tuya
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home.
The pool sensor is compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 7002531
FEATURES
Floating pool sensor for measuring the water temperature
LCD display for displaying the temperature (°C/°F)
Wireless frequency: 868 MHz
Wireless transmission range of up to 30 m to optional base station
7 available channels
Waterproof (IPX7)
Powered by 2x AA batteries (not included)
DELIVERY CONTENT
Pool thermometer
Instruction manual
Falling under the car when moving, taking a knock from a child's football, simply slipping from your hand during installation - even the most robust 7-in-1 wireless sensor is not immune to everyday misadventure. But, even if your outdoor sensor is permanently damaged beyond repair, there's no need to buy a whole new weather station simply to keep an eye on the weather. Your base station can continue to function perfectly. This sensor is the perfect replacement part for your 4-day 4CAST WiFi weather centre. The device is operated in much the same way as you are used to: Start by inserting the batteries (not included). Then, fit the replacement sensor in your preferred location using the installation material supplied. Once everything has been tightened up, all you need to do is connect to your base station (not included). With a replacement sensor, this is not an automatic process; you will needed to press the WiFi/SENSOR button on the console. The console will then start to search for the signal from the sensor. Connected? Then you're done, and you can start enjoying up-to-date and local weather data from your sensor for outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level and light intensity.
Rehabilitate your 4-day 4CAST WiFi weather centre with the replacement sensor.
FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 420 x 170 x 213 mm
DELIVERY CONTENT
Wireless sensor with installation material
Base station not included!
Instruction manual
FEATURES5.7'' colorful display for time and detailed weather informationWIFI connection with internet time synchronizationReceives weather data from 5in1 profi sensor and from wireless thermo-hygro sensor via 868 MHz transmissionPublish local weather station data on weather underground and weather cloudDisplays time, calendar, weekday and moon phaseAlarm clockIce pre-alert functionIndoor temperature (°C/°F) and humidity with comfort indicationOutdoor/Channel’s temperature (°C/°F) and humidity readingsGust or average wind speedWind direction (16-direction indicator)Rain rate (hourly, daily, weekly, monthly, total rainfall)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Barometric pressure in relative or absolute readings (hPa, inHg, mmHg)Smart outdoor “Feels like” sensation readingWeather index for outdoor feels like, dew-point, Wind chill, Heat indexMax/Min memory records and past 24 hours (hourly record)Hi/Lo alert with flash LED indicatorWeather calibration (on set-up UI)3-mode brightness: Hi / Lo / Off7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU)Support firmware update (TBC)Support a wireless 5-in-1 professional weather sensor (Included)Support up to 7 pcs wireless extra sensors (Optional) (item no. 7009999)
DELIVERY SCOPEMain unitProfessional 5in1 sensor incl. mounting material100-240V/50 Hz power adapter and cable
The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very
compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for
the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included!
The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and
precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a
multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected
measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols
on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined
value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated.
A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol.
Furthermore, the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the ''moonstruckers'' also the different phases of the moon are shown. An alarm function with snooze mode is also integrated.
FEATURES
5-in-1 outdoor multi sensor
Inside temperature (°C/°F) and humidity
Outside temperature (°C/°F) and humidity
Wind direction and speed
Graphical weather trend display (12 hours)
Beaufort index (scale for the classification for wind speeds)
Precipitation rate with history (day/week/month)
Air pressure with history (24 hours)
Heat index
Dew point
Radio controlled time and date setting
Phases of the moon
Alarm function
Ice/frost warning
Min/Max memory (up tp 24 hours)
LED background light, amber
SCOPE OF DELIVERY
Base station with stand
5-in-1 Multisensor with mounting material
Manual
Additionally, 6 AA batteries are required (not included)
PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging:
Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802510.
Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.
For all ambitious amateur gardeners and meteorologists who are not satisfied with average values of the weather services, the digital wireless rain gauge from BRESSER offers the possibility of your own professional precipitation measurements.
The BRESSER Professional rain gauge shows the detailed rain measurement values in millimetres, but also the indoor and outdoor temperature is displayed precisely. The rain gauge has a radio distance of 150m outdoors. The radio range is achieved by the 868 Megahertz radio signal. The base station can determine temperature and humidity and can also show the rain readings hourly, daily, weekly, monthly or annualy. It is equipped with a graphical histogram.
FEATURES
Precipitation measurement
DCF radio clock reception and display
Wake-up call with snooze function (Snooze)
Outdoor temperature alarm (frost warning)
Outdoor temperature (in °C or °F)
Indoor temperature (in °C or °F)
Humidity inside
Bar chart
SINCE-function for displaying the total precipitation from a certain point in time
Lowest and highest value display
Max-/Min-values storage
Backlight
Battery operated (Station: 2x AA; Sensor: 4x AA - not included!)
SCOPE OF DELIVERY
Rain gauge
Base station
Detachable stand
Installation material
Operation manual
The new BRESSER Weather Station 5-in-1 white combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires very little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are included.
The 5-in-1 outdoor sensor reliably transfers all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station these values can be read but can also be stored as data history. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display.
For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated.
A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol.
Furthermore the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). In a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the “moonstruckers” also the different phases of the moon are shown. An alarm function with snooze mode is also integrated.
FEATURES
5-in-1 outdoor multi sensor
Inside temperature (°C/°F) and humidity
Outside temperature (°C/°F) and humidity
Wind direction and speed
Graphical weather trend display (12 hours)
Beaufort index (scale for the classification for wind speeds)
Precipitation rate with history (day/week/month)
Air pressure with history (24 hours)
Heat index
Dew point
Radio controlled time and date setting
Phases of the moon
Alarm function
Ice/frost warning
Min/Max memory (up tp 24 hours)
LED background light, amber
SCOPE OF DELIVERY
Base station with stand
5-in-1 Multisensor with mounting material
Manual
Additionally, 6 AA batteries are required (not included)
PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging:
Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802510.
Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.
The wind gauge from BRESSER is a professional anemometer for your home garden. You can read the current wind speed from the base station as well as average and maximum values per hour, day, month or year can also be displayed. A wind speed alarm can also be set.
The 3-in-1 outdoor sensor determines not only wind speed but also outdoor temperature and humidity. The determined values are transmitted to the base station by radio over a maximum range of 150 m.
The base station also has integrated sensors for measuring room temperature and humidity.
BASE STATION
Displays time (12h/24h), date and day of week
Automatic time setting via DCF radio signal
Wake-up function
Graphical weather forecast for 24 h
Integrated sensors for measuring humidity (%) and temperature (C°/F°)
Displays felt temperature, wind chill, dew point and heat index
Frost warning
Wind speed alarm
History data memory
Backlight (orange)
Adjustable display contrast
Detachable stand and suspension device
Battery powered: 2x AA batteries (not included!)
WIND GAUGE
Wind sensor for measuring wind speed (mph, m/s, km/h, knots)
Integrated sensors for measuring humidity (%) and temperature (C°/F°)
Transmission of measurement data to base station via radio (frequency: 868 MHz)
Transmission range: up to 150 m
Battery powered: 3x AA batteries (not included!)
SCOPE OF DELIVERY
Base station
Removable stand
Wind gauge
Mounting material
Instruction manual
The new NATIONAL GEOGRAPHIC WIFI Colour Weather Station with 7-in-1 professional outdoor sensor offers a comprehensive information service. The multifunctional outdoor sensor can easily be installed using the installation accessories supplied!
The sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, amount of precipitation, as well as UV level and light intensity to the base station via 868 MHz frequency. The console's clearly structured 5.7" colour display shows a large variety of measured local data as well as your station's historically measured values. A reliable local weather forecast is calculated and displayed using weather symbols on the console display for the upcoming 12h. The WIFI function allows users to share their local data via online platforms such as "AWEKAS", ''Weather Underground'' or ''Weather Cloud''. Furthermore, the WIFI function enables Internet time synchronization and firmware updates. You can set a temperature alarm for maximum and minimum values, which triggers both an acoustic and a light signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated to warn of frost/ice.
A poor indoor climate often poses health risks, especially for children and older people. The BRESSER WIFI colour Weather Station offers a smart feature for this as well. The indoor climate indicator always informs about the indoor climate by means of a symbol.
For all ''moon addicts'' the different phases of the moon are also displayed. An alarm clock with snooze function is also included in the range of functions. You can transmit your weather data to the European Weather platform AWEKAS where you can also retrieve your weatherdata worldwide. Transmit data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home control system, depending on which sensors you have additionally purchased. This can be done easily and free of charge via our partner AWEKAS. This can be set up under the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ PROPERTIES 5.7'' colour display for detailed time and weather information WIFI connection with Internet time synchronisation Receives weather data from the 7-in-1 professional sensor and the wireless thermo-hygro sensor via 868 MHz Publish the local data of your weather station on the internet via websites such as AWEKAS, Weather Underground and Weather Cloud Display of time, calendar, weekday and moon phase Wake-up function Ice/frost warning Indoor temperature (°C / °F) and humidity with comfort display Outdoor temperature (°C / °F) and humidity display Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact indication based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature
weather index for dew point, wind chill factor and heat index via the Feels Like functionMin/max value memory (up to 24 hours) Alarm with LED display 3 different display brightness levels: High / Low / Off Support of firmware updates Security type: supports WPA3 encryption as of firmware 2.0Support a 7-in-1 professional multi-sensor (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS SCOPE OF SUPPLY Base station (Console)Professional outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cableBatteries are not included
Stay on top of the weather! The BRESSER Wi-Fi HD TFT 7-in-1 Professional Weather Station displays the temperature, humidity, wind speed and more. The HD TFT screen shows the comprehensive data from the 7-in-1 external sensor and up to 7 additional sensors (not included) in a wide variety of display modes. Easily switch between the start screen, detailed display, data log and more at the touch of a button! Thanks to the intuitive step-by-step interface, you can choose which measurements you want to view and how long you need them, either in a light or dark display design.
Wi-Fi weather station: no more getting caught in the rain!
No one likes to arrive at an important meeting soaking wet or get sunburned while working in the garden. With this weather station, you can do a quick weather check before leaving the house. The start screen shows you all up-to-date weather data, including a reliable graphic weather trend forecast, the UV level and the light intensity. It also displays the 'Feels-like' temperature, which is particularly practical for people who are sensitive to the weather. This function shows you how warm or cold it feels outside, based on your local measured values for wind, temperature and humidity. Other standard weather readings such as precipitation amount and rate, air pressure, wind speed and wind direction can also be found on the intuitive display.
The Wi-Fi weather station for more than just the here and now
The weather station shows a wide range of readings, including temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. But what about weather trends? After all, you can only decide whether the garden hose needs to be rolled out again if you know the amount of rain that has fallen in the past few hours. The detailed display adds a wealth of measurements to the start screen, such as the amount of rain during the last hour, 24 hours and the last month.However, when it comes to your local weather history, the weather station can do much more: You can also check the daily max. and min. values on the display, either in a table or a graph. If this isn't detailed enough, you can use the data log function, which records measurements at intervals of 5, 10 or 30 minutes. Perfect for hobby meteorologists who want to immerse themselves in data on the display or on their own computer!
View your weather data in more rooms with additional sensors
The weather station comes with a 7-in-1 sensor and a thermo/hygro outdoor sensor. However, sometimes two wireless sensors are just not enough. Do you ever struggle with mildew in your kitchen or bathroom? Have you ever turned up the heating in winter, only to discover that the air literally dries out? Regardless of the answer, it's always worth keeping an eye on the indoor climate in different rooms. If you have an outdoor pool, you can use a pool thermometer (not included) to check that the water is at an optimal temperature. For all this and more, you can connect up to 6 optional additional sensors to the base station of the Wi-Fi weather station. Just look in the Accessories tab to view a list of compatible devices. Once you've connected all the wireless sensors, the measurements are shown side by side on an intuitive start screen, which allows you to read and compare the temperature and humidity readings and trends for your kitchen, bedroom, or other rooms. You can also check the soil moisture and temperature with an optional soil sensor (not included). In addition, you can give each sensor a name to ensure that you keep track of the different locations.
Smart technology
In today's world, everything is networked. The weather station also has a number of connectivity functions to allow you to stay on top of the weather. You can register your new weather station with our partner, the German weather platform AWEKAS, free of charge. The weather station also supports the popular international platforms ProWeatherLive, Weather Underground and Weathercloud. You can also connect your weather station to your other favourite sites. This allows you to access the local measurement data from your Wi-Fi weather station from anywhere in the world. If you worry about your garden when you go on holiday, you can go online to check the weather conditions back home, and then ask your neighbours or friends to water the plants. If you have a smart home, you can also water your plants automatically. Simply use AWEKAS to transfer your measurement data such as temperature, humidity, wind speed and amount of precipitation directly to your smart home control unit. For example, you can set up your lawn sprinkler to be activated automatically when the lawn is dry, or configure your house to maintain an optimal indoor climate. Simply go to the following link and connect your weather station to AWEKAS:
https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/
Built-in clock and alarm
In addition to the local weather, the HD TFT display also shows you the time, day of the week, date and moon phase. Too early, or time to get up? Just take a look at the bottom of the screen! The weather station also helps you to decide what to wear for the day ahead: wake up to the built-in alarm and use the weather trend forecast to choose the right outfit. There is also a special feature for icy weather: if you activate the frost alarm, the alarm clock will ring 30 minutes earlier on icy days.
In addition, the Wi-Fi weather station calculates and displays the local times for sunrise and sunset, as well as for moonrise and moonset.
Keep on top of the weather with the Wi-Fi HD TFT 7-in-1 professional weather station!
BASE STATION FEATURES
7-inch HD TFT display with various display modes
Multi-channel overviews for displaying all live data from the wireless sensors
Transmits data to the German weather platform AWEKAS via Wi-Fi
Publish weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud and 1 additional user-defined platform)
Displays the weather trend as a graphic (24 hours / 30 days)
Historical data log, exportable to USB drive (not included)
Indoor temperature (°C/°F) and humidity with trend
Displays the outdoor temperature (°C/ °F) and humidity with trend
Displays the amount of precipitation (current, last hour, last 24 hours, last month)
Gusts and average wind speed
Colour indicator for the wind speed level
Displays the Beaufort scale (scale for classifying the wind speed)
Displays the wind direction (current and predominant, 16 directions)
Displays UV level
Displays light intensity
Weather forecast
Air pressure
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Maximum/minimum value memory (daily/total)
Weather data calibration
High/low alarm function
Individual naming of the additional sensors
Synchronization with Internet UTC time with time zone selection
Alarm clock with volume control and ice/frost warning
Time, calendar, day of the week and moon phase display
Sun-/moonrise, sun-/moonset
Choose between dark or light display
Display brightness and contrast can be customized, day and night mode
6 selectable display languages (EN, DE, FR, IT, ES, NL)
Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system)
Supports up to 7 additional sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: power adapter, 1x CR2032 back-up battery (included)
Dimensions: 190 x 140 x 19.5 mm / Weight: 325 g
FEATURES OF 7-IN-1 OUTDOOR SENSOR
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Can be mounted on a wall or post with the supplied adapter
Power supply: 3x AA batteries (not included), additional solar panel to extend the battery life
Dimensions: 225 x 170 x 410 mm / Weight: 533 g
THERMO-HYGRO SENSOR FEATURES
Measures the temperature and humidity
Transmission range of up to 150 metres
Power supply: 2x AA batteries (not included)
Dimensions: 60 x 113 x 39.5 mm / Weight: 126 g
DELIVERY CONTENT
Base station with power adapter
1x wireless 7-in-1 professional weather sensor
1x Thermo/hygro sensor
1x CR2032 back-up battery Manual
Compared with the Professional 6-in-1 Wi-Fi Weather Station (item no. 7002540000000), the new BRESSER Professional 7-in-1 Wi-Fi Weather Station has a new light intensity measurement function.
The 7-in-1 weather station measures a wide range of meteorological data directly in your vicinity, which can be viewed remotely via the internet. If you require additional functions, the weather station can be expanded with a range of optional sensors:
BRESSER soil temperature and moisture meter (item no. 7009972)
BRESSER Spa and pool thermometer (item no. 7009973)
FEATURES OF BASE STATION
Wi-Fi connection with internet time synchronization and support for firmware updates
Automatic or manual time setting
Publish your weather data on Wunderground or Weathercloud
Displays indoor temperature (°C/ °F) and humidity (%)
Outdoor temperature (°C/ °F) and humidity (%)
Light intensity (Klux / Kfc / W/m²)
Displays the current UV index, exposure level and recommended protection
Displays sunburn time (mins) based on current UV level
Wind direction and speed (m/s; km/h; Knoten; mph)
Beaufort index (scale for measuring wind speed)
Air pressure with 24-hour history (hPa/inHg/mmHg)
Rainfall with history (day/week/month)
Graphical weather forecast for next 12-24 hours
Weather index (‘feels like’ function, dew point, heat index, wind chill factor)
Trend indicator shows the weather trends for the next few minutes
Visual comfort level indicator for room temperature and humidity
Phases of the moon
Sunrise and sunset times
Alarm with snooze function (5 minutes)
Weekday alarm
Min/max memory (up to 24 hours)
Ice/frost warning
LED backlight, amber-coloured
Wall bracket and table stand
Supports a 7-in-1 sensor and up to 7 indoor sensors (includes 1x 7-in-1 sensor and 1x indoor sensor)
Dimensions: 215 x 172 x 29 mm and weight: 639 g
Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included)
Security type: supports WPA3 encryption as of firmware 1.09
FEATURES OF 7-IN-1 OUTDOOR SENSOR
Measurement of temperature, humidity, wind speed, wind direction, precipitation quantity, UV level and light intensity
Powered via a large movable solar panel
In case of insufficient sunlight operation via 3x AA batteries (not included)
Range: up to 150 m
Dimensions: 390 x 174 x 465 mm
FEATURES OF INDOOR SENSOR
Measures the indoor temperature and humidity
Transmission range: up to 150 m
RF frequency: 868 MHz
Transmission interval: 60 seconds
Wall bracket and table stand
Power supply: 2x AA batteries (not included)
Dimensions: 60 x 113 x 39.5 mm and weight: 144 g
SCOPE OF DELIVERY
Base station with stand
7-in-1 multi-sensor with mounting materials
Thermometer/hygrometer
Power adapter
Instruction manual
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories!
The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station.
The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates.
An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator.
For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions.
This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information
WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase
wake-up function Ice/Frost warning
Interior temperature (°C / °F) Humidity with comfort display
Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature
weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display
Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included
The new BRESSER Wi-Fi colour Weather Station with a 5-in-1 professional sensor offers a wide range of data in a compact device. The advanced, multifunctional outdoor sensor is easy to mount with the supplied mounting accessories.
The outdoor sensor transmits measurements for wind speed, wind direction, humidity, temperature and precipitation to the base station at a frequency of 868 MHz.
The clearly structured 5.7" colour display on the base station also displays a range of historical data. It enables internal storage and evaluation of the measured data over a 24-hour period. Using the measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is indicated on the display by graphical symbols.
You can also use the Wi-Fi function to access your local weather data via Weather Underground. The Wi-Fi function also enables Internet time synchronisation and firmware updates.
There is a programmable alarm function for maximum and minimum values, which can emit an acoustic alarm and light signal if either value is reached. A special frost/ice warning alarm can also be configured for outdoor temperatures below -3 °C. A poor indoor climate can pose a particular health risk for children and the elderly. The BRESSER Wi-Fi colour weather station offers a smart feature to help tackle this. The indoor climate indicator uses symbols to visualise the current status of the indoor climate.
For fans of the moon, the display also indicates the various phases of the moon. An alarm with snooze function is also included.
FEATURES
5.7" colour display for detailed time and weather information
WiFi connection with internet time synchronisation
Receives weather data from the 5-in-1 sensor and wireless thermo-hygro sensor over 868 MHz frequency
Publish local weather station data on the internet via websites such as Weather Underground and Weather Cloud
Time, calendar, day of the week and moon phase display
Alarm function
Ice/frost warning
Indoor temperature (°C/°F) and humidity with comfort indicator
Outdoor temperature (°C/ °F) and humidity display
Displays gusts and average wind speed
Precise wind direction display (16 directions)
Precipitation quantity (hourly, daily, weekly, monthly, total precipitation)
Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow)
Atmospheric pressure display
Perceived outdoor temperature
Weather index for dewpoint, windchill factor and heat index
Min./max. memory (up to 24 hours)
Alarm with LED indicator
Weather calibration
3 different display brightness levels High/Low/Off
7 languages for days of the week
Firmware updates supported
Supports wireless 5-in-1 professional weather sensor (included)
Supports up to 7 additional wireless sensors (optional) (item no.: 7009999)
DELIVERY CONTENT
Base station
Professional 5-in-1 outdoor sensor with mounting accessories
100-240 V/50 Hz power adapter and cable
The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included!The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated.A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol.Furthermore the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the “moonstruckers” also the different phases of the moon are shown. An alarm function with snooze mode is also integrated.FEATURESColour-display5-in-1 outdoor multi sensorInside temperature (°C/°F) and humidityOutside temperature (°C/°F) and humidityWind direction and speedGraphical weather trend display (12 hours)Beaufort index (scale for the classification for wind speeds)Precipitation rate with history (day/week/month)Air pressure with history (24 hours)Heat indexDew pointRadio controlled time and date settingPhases of the moonAlarm functionIce/frost warningHi/Lo-AlertMin/Max memory (up tp 24 hours)LED background light, amberSCOPE OF DELIVERYBase station5-in-1 Multisensor with mounting materialPower plugManual
Come rain or shine, the BRESSER WIFI TB 7-in-1 RC Weather Station keeps you fully informed about the weather. The 7-in-1 outdoor sensor accurately measures temperature, humidity, wind direction and speed, precipitation, UV level, and light intensity, displaying the data on a well-arranged screen. However, thanks to the “WiFi connection”, you can also share your data on online platforms. Additionally, the graphical weather forecast and different alert settings ensure you're always ready for any weather.
Accurate weather forecast at a glance
Get a quick overview with the graphical weather forecast feature of the WiFi weather station. That’s how you’ll always know what to expect in the next few hours right outside your door. The additional weather warning functions alert you to high winds, heavy rainfall, and significant pressure drop.
Stay climatically up-to-date with the WiFI weather stationThe convenient WiFi feature lets you keep track of your local weather anytime and anywhere. Publish your data on platforms like WeatherUnderground and Weathercloud and access it from any location – perfect for keeping up with local weather while traveling! The WSLink App makes configuration and updates a breeze.
Optimize your indoor climate with this BRESSER weather stationIndoor temperature and humidity significantly affect comfort. This wireless weather station helps monitor your home or office environment. Quickly determine whether ventilation is needed based on the precise indoor temperature and humidity readings, including trends and a max/min value memory. The high/low value alert function let’s you know when preset thresholds are reached.
Transform your weather station into a versatile toolEnhance your WiFi weather station by adding up to 3 optional sensors (not included). Use a thermo-hygrometer for additional room measurements, or simplify your gardening and outdoor activities with an optional soil or pool thermometer (not included). Find compatible devices in the BRESSER accessories range!
Get the BRESSER WIFI TB 7-in-1 RC Weather Station now for comprehensive insights into weather and indoor climate conditions!
FEATURES BASE STATION
Weather Station with 7-in-1 outdoor sensor for comprehensive weather data
WiFi for accessing and sharing local weather data on weather platforms
(WeatherUnderground, Weathercloud, and one more platform)
Displays detailed readings from the 7-in-1 outdoor sensor
(Outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level, light intensity)
Indoor temperature (°C/°F) and humidity with trend
Weather forecast
Air pressure with history and trend
Max/min value recording
Temperature and humidity high/low alerts
Weather warnings for wind, precipitation, and pressure changes
Displays time, date, weekday, and moon phase
Built-in alarm clock with snooze feature
Easy set-up and updates via WSLink app
Compatible with up to 3 additional thermo-hygro, soil, and pool sensors (not included, available separately in BRESSER accessories)
Powered by a mains adapter (included) and 1x CR2032 backup battery (not included)
FEATURES 7-IN-1 OUTDOOR SENSOR
Measures temperature, humidity, wind speed, wind direction, precipitation, UV level, and light intensity
Durable, waterproof design
Effective range up to 150 m
Requires 3x AA batteries (not included)
SCOPE OF DELIVERY
Base station with power adapter
7-in-1 wireless sensor
Instruction manual
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
With its colorful display and elegant design, the BRESSER WLAN Comfort Weather Station with 7-in-1 professional sensor offers you a perfect overview of time and weather. Through the LCD display contrast setting, you succeed in reading the time, the day of the week, the phases of the moon, the sunrise as well as the sunset, on the 7.4" color display from almost any viewing angle. The 7-in-1 professional outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation amount, as well as UV level and light intensity via 868 MHz frequency to the base station. Through the internal storage and analysis of the measurement data, a reliable local weather trend forecast for the coming 12 hours is displayed using graphical symbols. An extra alarm can also be activated for frost/ice warning. The WLAN function allows users to share their local data via weather platforms such as ''Weather Underground'' or ''Weather Cloud''. In addition, the WLAN feature enables internet time synchronization, as well as firmware updates. This station can also be connected to the German language portal AWEKAS. Optionally, you can transfer your weather data to AWEKAS or retrieve your weather data there worldwide. Transfer, among other things, data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home control. This is possible without any problems and free of charge via our partner AWEKAS. Under the following link this can be set up: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/FEATURES7.4'' color display for detailed time and weather informationWLAN connection with internet time synchronizationLCD display contrast adjustment to accommodate different viewing anglesPublish local data generated by your weather station on internet platforms such as "AWEKAS", ''Weather Underground'' and ''Weather Cloud''Display time, calendar, day of the week and moon phaseIce / frost warningIndoor temperature (°C / °F) and humidity with comfort displayOutdoor temperature (°C / °F) and humidity displayDisplay of UV level and light intensityDisplay of wind speed and wind direction (exact display based on 16 directions)Precipitation amount (hourly, daily, weekly, monthly, total rain)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Atmospheric pressure displaySensed outdoor temperatureWeather index for dew point, wind chill factor and heat indexMin. - /Max. value memory (up to 24 hours)3 different display brightness levels: High / Low / Off7 languages for day of the week (EN/ DE/ FR/ ES/ IT/ NL/ RU)Supports firmware updatesSecurity type: supports WPA3 encryptionSupports one 7-in-1 wireless professional sensorSupports up to 7 additional wireless sensors (7009999, SP60010000000, SM60020000000) Dimensions: 202 x 138 x 38 mmSCOPE OF DELIVERYBase station7-in-1 professional sensorPower supply
A breath of fresh air for fresh air enthusiasts, the BRESSER 7-in-1 Weather Center Weather Station Air-Mon merges locally measured weather data with current internet air quality values for your home, featuring a modern weather station with app and color display.
Weather station with outdoor sensor for a complete meteorological overview
Quickly mounted, the 7-in-1 wireless sensor in conjunction with the stylish base station including integrated thermo-hygrosensor and barometer, swiftly delivers accurate measurements. Look forward to local information about temperature, humidity, air pressure, wind speed, wind direction, precipitation, UV levels, and light intensity. For a broader weather outlook, just check the reliable 7-day forecast including maximum and minimum temperatures. Retrieve meteorological history through the max/min value memory.
Fully connected – smart use of the Wi-Fi weather station
Specific current air quality values appear via the Wi-Fi connection on the elegant color display. Not at home? Access all data via the intuitive ProWeatherLive App or through a web browser – anytime, anywhere!
Breathe deeply again with the air quality monitor
The air we breathe matters – protecting our health from pollutants around us is crucial. Therefore, the weather station displays the 6 most important pollutant values in your environment: carbon monoxide, nitrogen dioxide, sulfur dioxide, ozone, as well as fine particulate matter PM2.5 and PM10. And because these are many values, the AQI (Air Quality Index) provides a summarized assessment of the current air quality.
Red, yellow, or green – the traffic light as a comfort indicator
Is the air too poor for Sunday coffee on the terrace? The comfort level traffic light, available for each air quality factor, gives the answer. Conveniently, indoor temperature and humidity, as well as UV radiation, are also equipped with a traffic light indicator. This allows you to see at a glance the status of indoor climate and the likelihood of sunburn.Premium weather station with additional potential: the extensions
In addition to its main functions, the weather station already includes useful features such as automatic time display, moon phases, and an alarm clock. A well-rounded package indeed. And there's more: The BRESSER weather station, with rain gauge, wind gauge, and more, can be tailored to your individual needs with optionally available additional sensors. Optional devices (not included) allow you to easily check, for example, the pool temperature, soil moisture in your flowerbed, or indoor climate in multiple rooms. A CO2 sensor (not included) and an HCHO/VOC sensor (not included) provide even more insights into local air quality. Browse through the compatible BRESSER accessories for individual extensions.
Make the 7-in-1 Weather Center Weather Station Air-Mon the new centerpiece of your home.
BASE STATION FEATURESWeather station with air quality monitor
Wi-Fi connection for retrieving and sharing local data on platforms like ProWeatherLive, WeatherUnderground, and Weathercloud
Display of internet data on local AQI (Air Quality Index) and the 6 key pollutants (PM2.5, PM10, NO2, SO2, O3, CO)
Comfort level traffic light for air quality measurements, UV levels, and indoor climate
Display of precise measurements from the 7-in-1 outdoor sensor
(Outdoor temperature, humidity, wind speed, wind direction, precipitation, UV levels, light intensity)
Indoor temperature (°C/°F) and humidity
Current weather and 7-day forecast with max/min temperatures
Air pressure
Weather and air quality alert functions
Weather data calibration
Max/min value memory
Time and date (internet time synchronization)
Moon phase, sunrise and sunset
Alarm clock with snooze function and frost warning
Expandable with the following optional sensors for direct measurement on site:
Up to 3x thermo-hygro, soil, and/or pool sensor (not included)
1x PM2.5/10 sensor (not included)
1x CO2 sensor (not included)
1x CO sensor (not included)
1x HCHO and VOC sensor (not included)
Suitable for table or wall mounting
Power supply: AC adapter (included), CR2032 backup battery (not included)
7-IN-1 OUTDOOR SENSOR FEATURESMeasuring temperature and humidity
Measuring wind speed, direction, and precipitation
Measuring UV levels and light intensity
Solar panel for extending battery life
Range: up to 150 m
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERYBase station
7-in-1 wireless sensor
Power adapter
Operating instructions
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories!
The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station.
The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates.
An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator.
For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions.
This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information
WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase
wake-up function Ice/Frost warning
Interior temperature (°C / °F) Humidity with comfort display
Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature
weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display
Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included
Stay on top of the weather! The BRESSER Wi-Fi HD TFT 7-in-1 Professional Weather Station displays the temperature, humidity, wind speed and more. The HD TFT screen shows the comprehensive data from the 7-in-1 external sensor and up to 7 additional sensors (not included) in a wide variety of display modes. Easily switch between the start screen, detailed display, data log and more at the touch of a button! Thanks to the intuitive step-by-step interface, you can choose which measurements you want to view and how long you need them, either in a light or dark display design.
Wi-Fi weather station: no more getting caught in the rain!
No one likes to arrive at an important meeting soaking wet or get sunburned while working in the garden. With this weather station, you can do a quick weather check before leaving the house. The start screen shows you all up-to-date weather data, including a reliable graphic weather trend forecast, the UV level and the light intensity. It also displays the 'Feels-like' temperature, which is particularly practical for people who are sensitive to the weather. This function shows you how warm or cold it feels outside, based on your local measured values for wind, temperature and humidity. Other standard weather readings such as precipitation amount and rate, air pressure, wind speed and wind direction can also be found on the intuitive display.
The Wi-Fi weather station for more than just the here and now
The weather station shows a wide range of readings, including temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. But what about weather trends? After all, you can only decide whether the garden hose needs to be rolled out again if you know the amount of rain that has fallen in the past few hours. The detailed display adds a wealth of measurements to the start screen, such as the amount of rain during the last hour, 24 hours and the last month.However, when it comes to your local weather history, the weather station can do much more: You can also check the daily max. and min. values on the display, either in a table or a graph. If this isn't detailed enough, you can use the data log function, which records measurements at intervals of 5, 10 or 30 minutes. Perfect for hobby meteorologists who want to immerse themselves in data on the display or on their own computer!
View your weather data in more rooms with additional sensors
The weather station comes with a 7-in-1 sensor and a thermo/hygro outdoor sensor. However, sometimes two wireless sensors are just not enough. Do you ever struggle with mildew in your kitchen or bathroom? Have you ever turned up the heating in winter, only to discover that the air literally dries out? Regardless of the answer, it's always worth keeping an eye on the indoor climate in different rooms. If you have an outdoor pool, you can use a pool thermometer (not included) to check that the water is at an optimal temperature. For all this and more, you can connect up to 6 optional additional sensors to the base station of the Wi-Fi weather station. Just look in the Accessories tab to view a list of compatible devices. Once you've connected all the wireless sensors, the measurements are shown side by side on an intuitive start screen, which allows you to read and compare the temperature and humidity readings and trends for your kitchen, bedroom, or other rooms. You can also check the soil moisture and temperature with an optional soil sensor (not included). In addition, you can give each sensor a name to ensure that you keep track of the different locations.
Smart technology
In today's world, everything is networked. The weather station also has a number of connectivity functions to allow you to stay on top of the weather. You can register your new weather station with our partner, the German weather platform AWEKAS, free of charge. The weather station also supports the popular international platforms ProWeatherLive, Weather Underground and Weathercloud. You can also connect your weather station to your other favourite sites. This allows you to access the local measurement data from your Wi-Fi weather station from anywhere in the world. If you worry about your garden when you go on holiday, you can go online to check the weather conditions back home, and then ask your neighbours or friends to water the plants. If you have a smart home, you can also water your plants automatically. Simply use AWEKAS to transfer your measurement data such as temperature, humidity, wind speed and amount of precipitation directly to your smart home control unit. For example, you can set up your lawn sprinkler to be activated automatically when the lawn is dry, or configure your house to maintain an optimal indoor climate. Simply go to the following link and connect your weather station to AWEKAS:
https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/
Built-in clock and alarm
In addition to the local weather, the HD TFT display also shows you the time, day of the week, date and moon phase. Too early, or time to get up? Just take a look at the bottom of the screen! The weather station also helps you to decide what to wear for the day ahead: wake up to the built-in alarm and use the weather trend forecast to choose the right outfit. There is also a special feature for icy weather: if you activate the frost alarm, the alarm clock will ring 30 minutes earlier on icy days.
In addition, the Wi-Fi weather station calculates and displays the local times for sunrise and sunset, as well as for moonrise and moonset.
Keep on top of the weather with the Wi-Fi HD TFT 7-in-1 professional weather station!
BASE STATION FEATURES
7-inch HD TFT display with various display modes
Multi-channel overviews for displaying all live data from the wireless sensors
Transmits data to the German weather platform AWEKAS via Wi-Fi
Publish weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud and 1 additional user-defined platform)
Displays the weather trend as a graphic (24 hours / 30 days)
Historical data log, exportable to USB drive (not included)
Indoor temperature (°C/°F) and humidity with trend
Displays the outdoor temperature (°C/ °F) and humidity with trend
Displays the amount of precipitation (current, last hour, last 24 hours, last month)
Gusts and average wind speed
Colour indicator for the wind speed level
Displays the Beaufort scale (scale for classifying the wind speed)
Displays the wind direction (current and predominant, 16 directions)
Displays UV level
Displays light intensity
Weather forecast
Air pressure
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Maximum/minimum value memory (daily/total)
Weather data calibration
High/low alarm function
Individual naming of the additional sensors
Synchronization with Internet UTC time with time zone selection
Alarm clock with volume control and ice/frost warning
Time, calendar, day of the week and moon phase display
Sun-/moonrise, sun-/moonset
Choose between dark or light display
Display brightness and contrast can be customized, day and night mode
6 selectable display languages (EN, DE, FR, IT, ES, NL)
Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system)
Supports up to 7 additional sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: power adapter, 1x CR2032 back-up battery (included)
Dimensions: 190 x 140 x 19.5 mm / Weight: 325 g
FEATURES OF 7-IN-1 OUTDOOR SENSOR
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Can be mounted on a wall or post with the supplied adapter
Power supply: 3x AA batteries (not included), additional solar panel to extend the battery life
Dimensions: 225 x 170 x 410 mm / Weight: 533 g
THERMO-HYGRO SENSOR FEATURES
Measures the temperature and humidity
Transmission range of up to 150 metres
Power supply: 2x AA batteries (not included)
Dimensions: 60 x 113 x 39.5 mm / Weight: 126 g
DELIVERY CONTENT
Base station with power adapter
1x wireless 7-in-1 professional weather sensor
1x Thermo/hygro sensor
1x CR2032 back-up battery Manual
Stay on top of the weather with the BRESSER 6-day 4CAST PRO SF 7-in-1 Wi-Fi weather Station with a solar-powered sensor! The weather station displays a 6-day weather forecast with maximum/minimum temperature readings, and also tells you the chance of rain. It also features a 10-inch colour display, which ensures that all the weather stats are easy to read. The modern Wi-Fi weather station with a solar-powered sensor obtains the forecast data via the Internet from the ProWeatherLive platform. In addition to the weather forecast, the weather station also displays the local visibility and cloud cover.
Eco-friendly weather station with solar-powered sensor, ideal for amateur meteorologists
The weather station comes with a solar-powered outdoor sensor, which is powered by solar energy and measures temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. Simply align the large solar panel with the sun according to your location. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries (not included) as a back-up during installation, and they will take care of the power supply. All the measurements will appear on the screen of the base station, which can be located up to 150 metres away.
Wi-Fi weather station with feature-packed base station
The base station of the 6-day 4CAST PRO SF weather station features a stylish design and displays the data received from the solar-powered sensor. It also takes its own readings via the built-in thermo/hygro sensor, which measures the ambient indoor temperature, humidity and air pressure. Together with the maximum/minimum memory, this enables you to keep an eye on the indoor climate and effectively prevent mildew and excessively dry air. Outdoor temperature, precipitation and more – you can also view the maximum/minimum readings for the other measurements made by the solar-powered sensor.
Share weather data and use it with your smart home
Access the measurements from your solar-powered sensor remotely and share them with others: with a few clicks, you can send your weather station data to the ProWeatherLive platform. If you have a smart home, you can also make use of the German-language portal AWEKAS, which allows you to transfer measurement data from the solar-powered sensor to your smart home system free of charge. Simply follow the link below to set up the weather station for your smart home system:
https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/
Never lose track of time
In addition to its elegant, contemporary design, the 4CAST PRO SF Wi-Fi weather station allows you to keep track of the time, date, day of the week and moon phase via the large display. For people who enjoy watching the sunset or observing the moon, the weather station also displays the sunrise/moonrise and sunset/moonset times.
Solar-powered weather data: Stay informed of the weather with the BRESSER 6-day 4CAST PRO SF 7-in-1 Wi-Fi weather station with a solar-powered sensor!
BASE STATION FEATURES
6-day weather forecast (today and 5 following days)
Large 10” colour display with stylish design
Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive,
AWEKAS, Weather Underground or WeatherCloud
Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server
Local visibility and cloud cover via ProWeatherLive server
Indoor temperature (°C/°F) and humidity
Displays precise measurement data from the 7-in-1 solar outdoor sensor
(Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity)
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Gusts and average wind speed
Beaufort index (scale for measuring wind speed)
Sunburn time (in mins)
Air pressure
Weather data calibration
Weather alarm function via ProWeatherLive server
Maximum/minimum value memory (daily/total)
Backlight with automatic dimming function
Displays the time, date, day of the week and moon phase
Sun/moonrise, sun/moonset
7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU)
Supports firmware updates
Supports up to 7 additional sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: Mains plug (included), CR2032 back-up battery (not included)
Dimensions: 219 x 200 x 26 mm
FEATURES OF 7-IN-1 OUTDOOR SENSOR
Powered via a large movable solar panel
In case of insufficient sunlight operation via 3x AA batteries (not included)
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Power supply: solar panel, 3x AA batteries as back up (not included)
Range: up to 150 m
Dimensions: 390 x 174 x 465 mm
DELIVERY CONTENT
Base station
Solar-powered outdoor sensor
Power adapter
Instruction manual
It's easily done: you've just moved house and want to move your 7-in-1 professional sensor for your BRESSER Wi-Fi Comfort weather centre to a new location. While attempting to move the sensor, you accidentally drop it and the sensor stops working. If this sounds like you, this 7-in-1 wireless sensor is just what you need for your weather station. The setup is the same as usual: simply insert the batteries (not included) and install your replacement sensor in the desired location using the mounting materials provided. Once you've installed the sensor, all you need to do is connect it to your existing base station (not included). Simply press the Wi-Fi/Sensor button on the base station, and the base station will search for the signal from your new outdoor sensor. The two devices will then automatically connect to each other. The local data from your sensor, including the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity will appear on your elegant colour display.
Restore full functionality to your Wi-Fi Comfort weather centre with the 7-in-1 replacement sensor.
FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
DELIVERY CONTENT
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
The new BRESSER Weather Station 5-in-1 COLOUR combines a compact design with an extensive information service in a very unique way. The small-sized multifunctional outdoor sensor is very place-saving and can be placed almost everywhere. A pipe clamp and screws to mount it to a pole (tube diameter about 25-33 mm) as well as a stand are already included!The 5-in-1 outdoor sensor transfers reliably the measured values for wind speed, wind direction, humidity, temperature and precipitation amount to the main station. On the clearly structured display of the main station not only current values but also numerous of historical data can be displayed. This allows for the internal saving and evaluation of the measured values over a period of 24 hours. From the collected data the weather station determines a very reliable local weather trend forecast for the next 12 hours, which is displayed on the screen by 6 graphical symbols.
For maximum and minimum values an individual alert can be programmed which gives both an acoustical as well as a light signal when the predetermined value is reached. For outdoor temperatures below -3 °C a specific alert can be activated as frost / ice warning.
A bad room climate often carries a health risk particularly for children and the elderly. The BRESSER 5-in-1 Weather Station provides a smart solution. The room climate indicator informs by means of symbols about the room climate.
Furthermore the BRESSER Weather Station 5-in-1 disposes of a radio controlled time and date setting (DCF time signal). Just a few minutes after switching on the weather station the current Central European Time and the date with weekday are automatically set. An alarm clock with snooze function are also part of the scope of features.
A new feature of this weather station is the colour change of the display when the outdoor temperature changes. So one can easily see from the colour of the display if it's weather for a jacket or a t-shirt.
FEATURES
changing display colour when temperature changes
8 display colours can be set manually
256 colours in the automatic mode
5-in-1 multifunctional outdoor sensor
mounting accessories for the sensor included
indoor temperature (°C/°F) and humidity
outdoor temperature (°C/°F) and humidity
wind directiont and speed
graphical weather trend (12 hours)
percipitation with history (day/week/month)
atmospheric pressure with history (24 hours)
heat index
dew point
radio controlled time and date setting
clock alarm
ice / frost warning
minimum / maximum memory (up to 24 hours)
LED background light, BTN colour display
SCOPE OF DELIVERY
main station with stand
5-in-1 outdoor sensor with mounting accessories
manual
Powered by 3x AA batteries (NOT included in delivery)
£140.99*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Facebook Pixel:
The cookie is used by Facebook to display personalized advertising offers based on user behavior to users of websites that integrate Facebook services.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.